Recommended 7-Way Connector for a 2022 Hyundai Tucson

Question

Question:

On my 2022 Hyundai Tucson, I already have the 4 pole trailer hookup, I want to change it to a 7 pin plug and the trailer I’m buying will already have the brake controller attached. I just need the 7 pin adapter. Which one is recommended?

asked by: Larry G

0

Expert Reply:

Since your 2022 Tucson already has a 4-way connector you will need the Universal Installation Kit for Trailer Brake Controller item # ETBC7. The kit includes a pre-wired 7- and 4-way trailer connector that mounts easily at the rear of your Hyundai with an included bracket. This kit is designed for use on a vehicle with an existing 4-way flat trailer connector and plugs directly into it.

You will then connect the black wire to the positive post on the vehicle's battery, the white wire to ground, and the yellow wire to vehicle's reverse circuit if applicable. This will provide you with the ability to control your trailer's brakes and also provide you with a 12v power wire for you trailer's accessory lights.

Since the trailer you're buying already has a brake controller this is all you will need. I have linked an installation video below to help walk you through the steps. This is a universal harness there are no custom fit 7-ways for your Tucson.

expert reply by: Jerred H

0

Answer 1

Okay, we can get your 2022 Hyundai Tucson set up with a 7-way so you can do some towing with a hitch that fits your vehicle, the Draw-Tite Max-Frame Trailer Hitch Receiver #DT22MR. What you will need are a couple of parts; first the 4-flat, which…

view full answer...

Answer 2

If your vehicle is equipped with a 4-Way connector, the Curt Universal Installation Kit #C57186 that you referenced includes everything needed to convert it to a fully-functional 7-Way. This includes the needed 10 gauge wire that you will connect…

view full answer...

Answer 3

We definitely recommend using a weight distribution hitch for towing your trailer on your Sante Fe XL. Not only does a weight distribution provide you the comfort and peace of mind of an easier drive, it also helps ease the stress put on the…

view full answer...

Answer 4

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 9

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Recommended 7-Way Connector for a 2022 Hyundai Tucson

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching