How Do You Raise a Grey Wolf Travel Trailer Off The Ground If The Stabilizer Jacks Can't Support It?
Question:
I have a grey wolf 20 rdse trailer, how do you jack it safely if you cant use scissor jacks?
asked by: Gary D
Expert Reply:
For lifting the wheel off the ground on your Grey Wolf 20RDSE travel trailer you will need to use a jack which is designed for lifting. I recommend the Powerbuilt Unijack Bottle Jack with Built-In Jack Stand # ALL620471 as it has a built in stand to help prevent the jack from lowering once you have it raised. The Scissor Jacks # JSC-24 that come on campers like your Grey Wolf are only designed to stabilize the camper from moving around while you walk inside the camper. They are not durable enough to support the camper weight lifted off the ground.
The Andersen Camper Wheel Chock and Leveler # AM3604 will allow you to drive up onto the chock to raise the trailer up to 4" off the ground on one side if you are trying to level at a camp ground. Be sure to get 2 since you have a tandem axle.
Products Referenced in This Question
Powerbuilt Unijack Bottle Jack with Built-In Jack Stand - 21" Lift - 6,000 lbs
- Automotive Tools
- Jacks and Jack Stands
- Bottle Jack
- 6000 lbs
- Powerbuilt
more information >
Andersen Camper Wheel Chock and Leveler
- Wheel Chocks
- Wheel Chock
- RV
- Trailer
- Plastic
- Single Chock
- Red
- Andersen
more information >
Product Page this Question was Asked From
Leveling Scissor Jack Set - 24" Lift - 10,000 lbs - QTY 2
- Camper Jacks
- Fifth Wheel Camper
- Pop Up Camper
- RV Motorhome
- Teardrop Camper
- Travel Trailer
- Stabilizer Jacks
- Steel
- 9001 - 10000 lbs
- Scissor Jack
- 24 Inch Lift
- Bolt-On
- Weld-On
- 2 Jacks
- Stromberg Carlson
more information >
Continue Researching
- Search Results: brakes
- Video: etrailer Easy Grease Trailer Hub and Drums Installation - 2020 K-Z Sportsmen Classic Travel Trailer
- Shop: Spindle Grease Seal Set for LM48548 or L68149 Inner Bearing and 1.980, 1.968 or 2.562 Bearing Buddy
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Article: Most Popular Wheel Bearings
- Video: etrailer Electric Trailer Brake Kit Installation
- Shop: Trailer Hitch
- Q&A: What is the Best Grease for Trailer Bearings
- Search Results: trailer brakes
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Trailer Wiring
- Search Results: l68149
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Replacement Grease Seals For TRP GS-1719DL
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Article: Trailer Wiring Diagrams
- Shop: Brake Controller
- Q&A: Replacement Trailer Brakes For a AL-KO Hub/Drum 8490
- Video: etrailer Trailer Brakes - Electric Drum Brakes - AKEBRK-35-SA Review
- Search Results: l44649
- Shop: Gooseneck Hitch
- Search Results: rg06~050
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Video: Dexter Nev-R-Adjust Electric Trailer Brake Kit Installation
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: How to Determine if Trailer has 84 Spindle to Pick Out Replacement
- Shop: Suspension Enhancement
- Search Results: grease
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
on Trailer Jack
