Can Swagman E-Spec Bike Rack Work With Saris Swing Away Hitch Extender

Question

Question:

Will the swagman e-spec bike rack work with a saris pivot extender for my Jeep wrangler? Thanks.

asked by: John K

0

Expert Reply:

Yes, the E-Spec bike rack will indeed work with the Saris swing away extender; the correct part numbers for both are the following:

- Swagman E-Spec Bike Rack # S94FR

- Saris Swing Away Hitch Extender for Bike Racks # SAR36VR

expert reply by: Kyle S

0

Answer 1

The best solution is to purchase the Swagman Bike Frame Adapter Bar for Electric, Step Through, and Cruiser Bikes #S57FR for the non-electric women's bike and any electric bike that has a step-through or alternative frame. The adapter bar…

view full answer...

Answer 2

In order for a bike rack to be used on the back of a flat-towed vehicle it must be rated for this as there is going to be additional stress on the bike rack due to the increase side to side sway. If you are using a vehicle with rear spare tire and…

view full answer...

Answer 3

From the center of the hitch pin hole to the upright portion of the Saris swinging hitch adapter #SAR36VR the measurement is 9 inches so this would easily clear past your spare since it is 7-3/4 inches out past the rear hitch pin.

view full answer...

Answer 4

The Yakima StageTwo Bike Rack for 2 Bikes #Y47VR is a wonderful new option from Yakima that can handle up to 2 bikes weighing 60 lbs each and you can definitely get the Loading Ramp #Y39VR to make loading/unloading much easier. We currently (March…

view full answer...

Answer 5

It sounds like you are talking about using the Yakima StageTwo Bike Rack #Y47VR in the hitch on your flat towed Jeep. If that is the case then yes, the Yakima StageTwo Bike Rack #Y47VR is rated to be used on a flat towed vehicle.

view full answer...

Answer 6

The bike rack we offer that has the best clearance to fit past the rear spare of your 2021 Rockwood 2614BS Ultra Light would be the Swagman E-Spec part #S94FR which has a distance of 15-1/2 inches from the center of it's hitch pin hole to the…

view full answer...

Answer 7

The Swagman E-Spec Bike Rack part #S94FR can usually accommodate one step-through frame bike without needing an adapter by switching the small and long hook around but for two step-through frame bikes I do recommend as least one adapter, the Swagman…

view full answer...

Answer 8

I would be happy to recommend a bike rack for your two Aventon electric bikes. Since both of your electric bikes have fenders I recommend the Swagman E-Spec Bike Rack for 2 Electric Bikes - 2" Hitches - Frame Mount #S94FR which will accommodate…

view full answer...

Answer 9

Yes, you can use the Swagman E-Spec Bike Rack for 2 Electric Bikes #S94FR in both a 2" hitch and a 2.5" hitch. The Swagman E-Spec Bike Rack #S94FR is already designed to be used in a 2" hitch, so you are good to go there. In order to…

view full answer...

Answer 10

I reached out to Swagman for you, who said the distance from the center of one wheel tray to the center of the opposite wheel tray is 9-1/2 inches on the Swagman E-Spec Electric Bike Rack #S94FR. This is a heavy-duty bike rack that will carry bikes…

view full answer...

Answer 11

For carrying heavier bikes with fenders like the e-bike and beach cruiser you mentioned the Swagman E-Spec part #S94FR would be your best option as it has the weight capacity needed, uses frame clamps that allow fit with fendered bikes, and also is…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Can Swagman E-Spec Bike Rack Work With Saris Swing Away Hitch Extender

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching