Does Curt In-Line Echo Brake Controller Require Brake Output Circuit of Vehicle to be Active

Question

Question:

Is brake output from the vehicle to the 7-way socket required for this brake controller? It does not appear necessary for C51180, but this product C79DR does not specify either way. Thanks!

asked by: Samuel J

0

Expert Reply:

On the vehicle side of the trailer wiring the brake output circuit is not required to be active to use the Curt In-Line Echo part # C79DR. This controller creates this circuit essentially right behind the 7-way which is why it's not needed.

expert reply by: Jameson C

0

Answer 1

In most vehicles, the trailer battery charge line circuit only has power when the vehicle is on. Therefore, you won't drain your battery with the Curt Echo In-Line Wireless Brake Controller part #C79DR installed, even with the trailer left…

view full answer...

Answer 2

I have exactly what you need to complete the wiring on your 2023 Toyota Highlander Hybrid! I'm not sure why the dealership would say adding a 7-Way would void the hitch warranty since they are completely different parts that aren't…

view full answer...

Answer 3

The Curt Echo In-Line Bluetooth Brake Controller w/ OneControl App #C79DR only uses the trailer brake lights and 12V power functions to operate, and it bypasses the power from an OEM brake controller so you'll be able to use this even if…

view full answer...

Answer 4

We haven't had the chance to install a brake controller on a 2020 Subaru Outback Wagon so I can't tell you offhand what the color of wire you need to use but I can still help you figure it out. For probing wires with limited access…

view full answer...

Answer 5

I do have an option for you Trevor but there is not a custom fit 7-Way harness available for the 2020 Subaru Outback Wagon. You will need to convert Tekonsha 4-Pole flat trailer connector part #118467 to a 7-way connector with part #ETBC7. The…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers #AL88211 comes with two separate Schrader valves so that you can air up each air spring individually. If you're also looking for a dual path on-board…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Does Curt In-Line Echo Brake Controller Require Brake Output Circuit of Vehicle to be Active

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching