Toolbox Recommendation For 2002 Ford Ranger With Flare Side

Question

Question:

What size tool box will fit on a 2002 ford ranger flare side side step bed?

asked by: LeAnn P

0

Expert Reply:

I spoke with my contact at DeeZee about your 2002 Ford Ranger with the flareside. Although we do not offer a crossover tool box that would fit we do have an alternative for you.

I recommend the DeeZee Red Label Truck Bed Toolbox, part # DZ8537. This Brite-Tread aluminum tool box with a silver finish measures 37-1/8 inches long x 19 inches wide x 15-9/10 inches tall, and mounts to the floor of your pickup. If you choose not to mount the tool box to the bed of the truck, it has handles mounted on the sides that allow the tool box to be moved.

This is also available in a black finish. The part number for this is # DZ8537B.

expert reply by: Jeffrey L

0

Answer 1

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 4

Hey John, so the correct amount of spring bar tension will be based on the trailer's tongue weight and how it affects the suspension of your Nissan Frontier. Every WD system is a little different but what it comes down to typically is measuring…

view full answer...

Answer 5

Yes, the best option we can offer you to add fuel capacity is with the DeeZee Truck Bed Auxiliary Tank part #DZ91752X which should fit in the space you have between the cab and 5th wheel hitch no problem as it is only 9" deep. I don't have…

view full answer...

Answer 6

The Progressive Dynamics Replacement Section #PD4655V does have a jumper to change the charging profile to lithium compatible. You'll simply need to move the black jumper over from the WIZ side to the LI side.

view full answer...

Answer 7

I got some information from Yakima and included a diagram of the EXO SwingBase #Y34VR, which is the base part for the EXO SwingBase 2 Tier #Y82VR. Though the measurement from the pin hole to the closest edge of the carrier is not included in said…

view full answer...