Slip-On Custom Towing Mirrors for a 2014 Ram 1500 Bighorn

Question

Question:

I have a 2014 RAM 1500 bighorn with heated mirrors that have puddle lights and auto dim. Do you have towing mirrors that will fit?

asked by: Tom

0

Expert Reply:

You can use CIPA towing mirrors # CM11400 on your 2014 Ram 1500. But the mirrors will block the puddle lights while installed. I have linked a video showing an example installation for you.

expert reply by: Michael H

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

Drilling down through the truck bed is required for the installation of any 5th wheel trailer hitch mounting kit with above the bed rails for your 2015 Ram 1500 short bed, including #DM8552030-71. But this is a 4-bolt installation kit so you would…

view full answer...

Answer 8

Hi Bruce, To lift your trailer we'll first need to check of the suspension and see if you have torsion axles or a leaf spring suspension. If you have torsion axles then I'll need to see the axle tag in order to determine what you have so I…

view full answer...

Answer 9

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350 lbs…

view full answer...

Answer 10

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 11

The Demco installation kit #DM8552030-71 is compatible with B&W, Curt, Draw-Tite, Hidden Hitch, Husky, Reese, Pro Series and Valley 5th wheel hitches that fit in industry standard above the bed rails. The Demco kit also will not fit if the truck…

view full answer...

Answer 12

The Demco AutoSlide #DM8550040 will work for your 2015 Ram 1500 and 5th wheel trailer. Demco designed this 13K Hijacker AutoSlide 5th Wheel Hitch #DM8550040 with the 6 foot beds in mind. As you turn this hitch will give you an extended distance of…

view full answer...

Slip-On Custom Towing Mirrors for a 2014 Ram 1500 Bighorn

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching