Availability of 32" x 9" Slant Back Fender For Boat Trailer

Question

Question:

Do you have a slant back fender in aluminum for a boat trailer? 32 in for 14-in wheel and tire. My fender is 9 in at the bottom and 7 in at the top and has a backing plate.

asked by: Marc M

0

Expert Reply:

While we don't have one in aluminum, we do have one in steel.

It is the Slant Back Fender # HP48VR which measures 32" long x 9" wide x 14" tall like your current fender, but you'll need to source your own backing plate as we only have those up to 30".

expert reply by: Samuel C

0

Answer 1

To determine what fenders will fit best on your ShoreLand'r boat trailer I will need to have some pictures of your mounting brackets along with the distance between the brackets. This will help me to determine which of the fender sets below would…

view full answer...

Answer 2

Since one end of a slipper spring is suspended instead of bolted to a hanger or shackle strap the Dexter Trailer Springs Over-Under Conversion Kit part #K71-385-00 and other likes them are considered unsafe for slipper springs. The only other option…

view full answer...

Answer 3

Yes, you can change trailer wheel size from 13 inch to 15 inch on the same axle if that axle isn't a 2000 lbs axle. Most 2000 lb axles are not rated to use a 15 inch tire. Almost all 3500 lb and up axles can handle 15 inch tires which is most…

view full answer...

Answer 4

What I recommend, if the trailer has round axles, is an over-under conversion kit. For 3 inch round axles use #K71-385-00 and for 2-3/8 inch round axles use #K71-384-00. This of course will only work if the leaf springs are mounted to the bottom of…

view full answer...

Answer 5

The closest fender we offer to what you have has a distance of 28 inches between the mounting brackets. This would be the Fulton Single Axle Trailer Fender #F008573. I wish we had exactly what you would need, but if you would be willing to move your…

view full answer...

Answer 6

The Single Axle Trailer Fenders w Mounting Brackets - White Plastic - 13" to 15" Wheels #PF11X35W-2 comes with the mounting brackets to stabilize the fender. You do not need to drill into the backing for that installation. If you choose to…

view full answer...

Answer 7

We won't have an exact OEM fender part for your 1997 EZ-Loader boat trailer but we do offer a range of general purpose trailer fenders in plastic, aluminum and steel. I linked for you just the plastic fenders we have for 14-inch wheels and the…

view full answer...

Answer 8

I do not recommend using a leaf spring spacer (lift block) on your trailer. The reason for this is because they can cause the trailer to become extremely bouncy and rough which is just going to put more stress on your suspension and wear out the…

view full answer...

Answer 9

The biggest advantage and reason most people go with a larger trailer tire is the increased weight capacity that the larger tires offer. The larger diameter offers a negligible amount of better ride quality for the trailer since the larger the tire…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hi Bruce, To lift your trailer we'll first need to check of the suspension and see if you have torsion axles or a leaf spring suspension. If you have torsion axles then I'll need to see the axle tag in order to determine what you have so I…

view full answer...

Answer 12

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

view full answer...

Availability of 32" x 9" Slant Back Fender For Boat Trailer

Product Page this Question was Asked From

Continue Researching