Will the Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel Work With a 225/75R15 Tire

Question

Question:

Will this Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel - 15 x 6 Rim - 5 on 4-1/2 fit this tire Transeagle ST Radial Premium Trailer Radial Tires-ST225/75R15 225/75/15 225/75-15 124/121L Load Range G LRG 14-Ply BSW Black Side Wall

asked by: Chris

0

Expert Reply:

Yes, the Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel # AM22627 will work with the Transeagle ST Radial Premium Trailer Radial Tires-ST225/75R15.

expert reply by: Scott S

0

Answer 1

The Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel #AM22627 that you referenced has a zero offset and a backspacing of 3-1/2 inches.

view full answer...

Answer 2

The Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel #AM22327 has a 0 offset and has a 14 inch diameter and is 5-1/2 wide. This wheel has a weight capacity of 1,900 pounds. If you have any further questions please feel free to reach back out to me…

view full answer...

Answer 3

Wheel offset is very similar to backspacing and refers to the location of a wheel's rim in relation to the wheel's center. Most trailer wheels have a 0 offset, but to determine if the wheels on your trailer have one, you will first…

view full answer...

Answer 4

Yes, a 205/75R15 tire like the Karrier ST205/75R15 Radial Trailer Tire - Load Range D #AM10245 will fit the Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel #AM22627.

view full answer...

Answer 5

The valve stem part #AM20906 that you referenced has an air pressure rating of 100 psi and can fit valve stem rim holes that are .453 or .625 inch. I attached a review video for this valve stem for you to check out as well.

view full answer...

Answer 6

Yes, the Aluminum Hi-Spec Series 6 Trailer Wheel part #AM20455 has a wheel bolt size of 1/2 inch-20 so you can use the original 1/2-20 lug nuts like part #AM90049.

view full answer...

Answer 7

view full answer...

Answer 8

In regards to a trailer wheel and tire assembly, the psi rating comes from the trailer tire and valve stem. Therefore, if the psi rating of the valve stem exceeds that of the trailer tire you will not have any issues. The trailer wheel itself does…

view full answer...

Answer 9

Yes, so long as you have the needed clearance, you can certainly upgrade the tires on your boat trailer from 205/75R15 to 225/75R15. The 225/75R15 tires will add just over 1/2 inch to the top of the tire, and be about 1/4 inch closer to the frame…

view full answer...

Answer 10

Yes, your Dexstar wheel can handle the 80 psi requirement of your new tires. If there was anything in your tire/wheel setup that might not handle 80 psi it would actually be the valve stems which you could pretty easily swap with the part #AM20906…

view full answer...

Answer 11

The minimum distance between the inside of a tire and the frame rail depends a lot on the setup of the trailer. But as long as the tire and the frame don't touch you would be fine. It's hard to give an exact figure as trailer setups…

view full answer...

Answer 12

I went out to the warehouse and pulled an Americana Trailer Wheel Center Cap, #AM90175, to determine the finish that is on it. Though in the pictures it looks dull, the cap is actually shiny, you can see yourself clearly but it is not as brilliant…

view full answer...

Will the Aluminum HWT Hi-Spec Series 03 Mod Trailer Wheel Work With a 225/75R15 Tire

Product Page this Question was Asked From

Continue Researching