What Is The Mounting Hole Spacing For The Empire Faucets Rv Handheld Shower Set With Slide Bar

Question

Question:

i have am arched shower bar that is 25 1/4 hole to hole ,Empire Faucets RV Handheld Shower Set w/ Slide Bar - 2 Function - Brushed Nickel Item # EM94JR mine is 28 overall long ,anything like that ? thanks

asked by: Brian L

1

Helpful Expert Reply:

The mounting holes for the Empire Faucets RV Handheld Shower Set w/ Slide Bar # EM94JR from center to center are 23" apart for the middle mounting hole and 23-5/8" apart for the holes further out towards the edge of the bracket.

The overall length of this product is approximately 25-1/2" in length so your current mounting holes would be covered but wouldn't line up to be used again. You could just fill the old holes with silicone and then drill new holes and insert some wall anchors to mount the # EM94JR in its place.

The options we carry for this style faucet only come in this size, so if you're wanting an exact replacement you could try reaching out to the trailer manufacturer or possibly Lippert Components to see if they have anything to match.

expert reply by: Kevin C

1

Answer 1

The Empire Faucets RV Slide Bar Handheld Shower Set, #EM94JR comes in brushed nickel and is overall, 25" from the outside edge of one base on the mounting bracket to the outside edge of the opposite base mounting edge. Please note the linked…

view full answer...

Answer 2

When installing the Empire Faucets RV Handheld Shower Set w/ Slide Bar #EM94JR they basically leave it up to the installer to make sure it's installed properly. Basically make sure there is a stud or the equivalent of drywall behind the shower…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 10

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Answer 11

Yes, you do have the exact right replacement converter for your 45 amp Magnetek 6345, which is the option from Progressive Dynamics: - Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp #PD4645V I have added links below to…

view full answer...

Answer 12

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

What Is The Mounting Hole Spacing For The Empire Faucets Rv Handheld Shower Set With Slide Bar

Product Page this Question was Asked From

Continue Researching