Locking 5th Wheel Saddle Pin Recommendation

Question

Question:

do they make a keyed lockable saddle pin... I have a BandW 3370 fifth wheel hitch?? Thanks

asked by: DAVID G

0

Expert Reply:

They sure do, what you're looking for is the Tow Ready Base Rail Lock for 5th Wheel Trailer Hitches # TR63254.

This hitch pin is 1/2" in diameter, measures 7-1/2" long, and has 3-1/2" of usable length. I've also included a video for you to check out.

expert reply by: Bryce D

0

Answer 1

Since the Lippert stabilizer jack motor can clearly work since it can extend but not retract that to me sounds like a bad switch which we offer with the part #LC144214.

view full answer...

Answer 2

While there isn't a replacement pin lock or padlock that will work, B&W has told us the best way to lock the hitch head is by using a cable lock. For that I recommend an adjustable cable lock: - Python Adjustable Cable Lock #8419DPF…

view full answer...

Answer 3

You could use the Tow Ready Base Rail Lock for 5th Wheel Trailer Hitches #TR63254 as a locking saddle pin for the B and W Companion fifth wheel hitch.

view full answer...

Answer 4

B&W doesn't offer or endorse a particular cover for their #BWRVK3600 Companion 5th wheel hitch, but we have found that the #CA80116 cover from Classic Accessories would be the best fit. As you can see in the provided photo, the…

view full answer...

Answer 5

The skid plate on your B&W Companion OEM 5th-Wheel Hitch part #BWRVK3300 should have been lubed prior to hitching the trailer per the owner's manual for the unit which is attached for you. The worn powder coat is not a huge deal but…

view full answer...

Answer 6

The total weight of the B and W Companion Slider Hitch part #BWRVK3370 that you referenced is 266 lbs.

view full answer...

Answer 7

Indeed it is, and we do in fact have the correct replacement for the pin to connect the head of the B&W Companion to the arms, which is the following part number: - Replacement Saddle Pin for B&W Companion 5th Wheel Trailer Hitches…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 11

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 12

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Locking 5th Wheel Saddle Pin Recommendation

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching