Is it Safe To Store the NOCO Boost Plus Jump Starter 329-GB40 In The Car With Freezing Temperatures?

Question

Question:

Can I leave the NOCO Boost Plus GB40 in my car over night? In the winter the temps can fall to 0F and in the summer rise to 100F

asked by: Rebecca

0

Expert Reply:

Yes, the NOCO Boost Plus Jump Starter # 329-GB40 can be safely stored in your car overnight. This jump starter has a safe operating temperature of -22 to 122 degrees Fahrenheit.

expert reply by: Bud M

0

Answer 1

Best option would be to add length to the jumper wire like part #329-GBC009 with additional 8 gauge wire to the length you need.

view full answer...

Answer 2

Letting the #329-GB40 charge all day did not cause any damage and what you are describing is normal behavior. There isn't much difference between leaving the GB40 plugged in all day and leaving your phone plugged in all day. Like many modern…

view full answer...

Answer 3

The NOCO Boost Plus Jump Starter part #329-GB40 has a built in safe guard to prevent overcharging. It is never recommended of course to leave anything on a charge indefinitely but will be fine if it is left on the charger overnight or for the weekend…

view full answer...

Answer 4

Yes, when the green LED charge indicator on the NOCO Boost Plus Jump Starter #329-GB40 stops "breathing" and remains a solid green that means the internal battery is completely charged up.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 12

To add a in-bed 7-way to your 2024 Chevy Silverado 2500 to make towing with a 5th wheel easier, I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 7' Long item #C58FV. This harness puts a 4-way and 7-way…

view full answer...