Center Caps For Aluminum Trailer Wheels

Question

Question:

Do your aluminum trailer wheels come with the center cap

asked by: LaVince S

0

Expert Reply:

The vast majority of aluminum trailer wheels do not come with a center cap; I'd need to know the specific wheel to tell you if the cap is included. I'll go ahead and list out center caps available so you can match it with the wheel you were interested in.

- Lionshead Trailer Wheel Center Cap w/ Snap-In Plug - 3.19" Pilot # LHCS102-SI60C

- Lionshead Trailer Wheel Center Cap w/ Snap-In Plug - 4.25" Pilot # LHCS108-SI60C

- Lionshead Trailer Wheel Center Cap w/ Snap-In Plug - 4.88" to 4.9" Pilot # LHCS109-SI60C

expert reply by: Kyle S

0

Answer 1

If your RV black water pipe is threaded, we have an adapter that may give you the additional length you're looking for. The LaSalle Bristol Toilet Flange, part #3446336347, has a spigot end. The Valterra DWV Adapter, part #D50-2929, converts a…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 4

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 5

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 6

The torque for the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility #8-174-5UC3 is not specified by the manufacturer. For 9/16 inch studs, the typical lug nut torque will be 120-140 ft lbs based on most…

view full answer...

Answer 7

Good morning, Cliff. As of today (3/27/24) we are expecting the #KE33JR tire/wheel combo to be in stock in about 2 weeks. Hopefully this means we can take our own pictures and put them on the site within maybe about 3-4 weeks from now. What I can…

view full answer...

Answer 8

Pete, yes the Snap-In Plug for Lionshead Trailer Wheel Center Cap #LHSI60C are definitely not brittle and are better made than most. This is still made of plastic, has a chrome finish, and will work with 15" to 16" diameter wheels with a 6…

view full answer...