Lug Nut Torque Chart For Various Size/Material Trailer Wheels and Tires

Question

Question:

What is the torque on a 8 lug 1/2stud with a regular lugnut. Thanks

asked by: Mark A

0

Expert Reply:

I have attached a chart below which will help you identify the correct amount of torque for your 8 lug, 1/2" wheel stud. The torque setting is different with steel or aluminum wheels.

expert reply by: Bud M

0

Wheel Lug Nut Torque Chart
(click to enlarge)

Answer 1

The torque for the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility #8-174-5UC3 is not specified by the manufacturer. For 9/16 inch studs, the typical lug nut torque will be 120-140 ft lbs based on…

view full answer...

Answer 2

To determine the correct air pressure for the tires on your Jayco trailer take a look at the sidewall. The tires should have the maximum psi listed. Trailer tires should always be inflated to the maximum psi indicated on the tire. This is because…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Yes, the Curt hitch part #C77ZV is a fit for the 2023 Toyota Crown Hybrid. I attached a link to the install instructions as well as a link to an installer finder in case you wanted to find someone near you to install the hitch.

view full answer...

Answer 5

Chad, the etrailer Trailer Hitch Receiver #e54KR you're looking at is not going to work with your 2023 Subaru Outback Wilderness; Instead, you'd want to use the etrailer Trailer Hitch Receiver #e25TR. This hitch is virtually the exact same…

view full answer...

Answer 6

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Lug Nut Torque Chart For Various Size/Material Trailer Wheels and Tires

Product Page this Question was Asked From

Continue Researching