Replacement for UFP HD1377 Hub and Drum Assembly
Question:
I have a upf 1377 the replacement I can not find my inside race is a 68110 which is a 233mm and the kit you guys are suggesting is a 255mm my spinal is a 168 shaft size where the seal rides and the hub size is a 233 Im stumped cant find the right hub please help thanks
asked by: Britt T
Expert Reply:
For a replacement hub and drum assembly you want to match the bearings. We have previously found that the Dexter # 84546UC3 matches the UFP HD1377. The difference between the # L68111 and # L68110 inner race doesn't matter as long as the bearings are the same.
This uses a # L68149 (1.378" inner diameter) inner bearing and # L44649 (1.063" inner diameter) outer bearing. I recommend using a digital caliper like the # PTW80157 to measure your existing bearings or spindle to verify that this matches what you have. I'm not sure what you measured exactly, but something like 233 mm (9.17323 inches) is way to large to be an inner or outer diameter of the bearings, races and seal on your hub.
I have attached a helpful diagram showing where to measure, along with an installation video for your reference.
(click to enlarge)
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 2.327 Inch O.D.
- Bearing L68149
- Race L68110
- 3500 lbs Axle
- etrailer
more information >
Replacement Race for L68149 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 2.361 Inch O.D.
- Bearing L68149
- Race 68111
- 3500 lbs Axle
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Hub & Drum For UFP HD-1377-10 & Hydraulic Brakes For Boat Trailer
- Q&A: Grease Seal for Spindle that is 1.68 Inches in Diameter
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 4,000-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-3/4 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Search Results: bearing buddy
- Article: Most Popular Wheel Bearings
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Search Results: lug nut
- Article: Trailer Tire Sizing
- Search Results: l44649
- Shop: Brake Controller
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Shop: Suspension Enhancement
- Search Results: 25580
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: etrailer Electric Trailer Brake Kit Installation
- Q&A: What is the Best Grease for Trailer Bearings
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Search Results: lug nuts
- Shop: Gooseneck Hitch
on Trailer Hubs and Drums
