Grease Seal for Spindle that is 1.68 Inches in Diameter
Question:
I have a tracker trailstar boat trailer. The hub on the spindle for the grease seal measures 1.68. Do I need this 1.719 grease seal. This is the one they suggest and it is a triple-lip seal. I am getting water in my hub.
asked by: Joe G
Expert Reply:
There are grease seals with inner diameters of 1.687 inches, # 168255TB, or 1.688 inches, # 168233, that would be a better fit. If the outer diameters match the inner hub bore diameter then you can use one of them instead.
Seal # 168255TB has an inner diameter of 1.687 inches and outer diameter of 2.561 inches.
Seal # 168233 has an inner diameter of 1.688 inches and outer diameter of 2.332 inches.
The seals in set # RG06-050 have an outer diameter of 2.565 inches so that would mean # 168255TB would be the best option. That 4 thousands of an inch difference wouldn't be an issue.
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.688 Inch I.D.
- 2.332 Inch O.D.
- Redline
more information >
Double Lip Seal for 3,700-lb Marine Hubs
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.687 Inch I.D.
- 2.561 Inch O.D.
- Dexter
more information >
Product Page this Question was Asked From
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Shop: Double Lip Seal for 3,700-lb Marine Hubs
- Shop: Replacement Trailer Hub Bearing - L68149
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Demco Hydraulic Drum Brake Assembly - Free Backing - Galvanized - 10" - Right Hand - 3,500 lbs
- Shop: Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Galvanized Steel
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: L68810 Bearing Recommendation for a L68149 Bearing
- Search Results: brake hardware
- Search Results: 44610
- Search Results: 68110
- Q&A: ST205/75r14 Trailer Tire Vs. a ST205/75D14
- Q&A: What is the Difference Between Over 80 inch and Under 80 inch Trailer Tail Lights
- Search Results: trailer wiring grommet
- Q&A: What is Difference Between Bearing # 168255TB and # 171255TB
- Q&A: Troubleshooting Water Getting Inside Hub on a 2019 Karavan Trailer For Boston Whaler 17 Montauk
- Video: Kodiak E-Z Lube Disc Brakes Installation
- Video: etrailer Trailer Idler Hub Assembly Installation
- Video: TruRyde Trailer Bearings Races Seals Caps - Caps - DC250L-DCRP Review
- Search Results: bearing buddy
- Search Results: master cylinder
- Search Results: idler hub
- Video: Demco Straight Tongue Trailer Coupler - Standard Coupler - DM12717 Review
- Q&A: Can EZ Lube Spindles Over Fill Trailer Hub And Cause Issues
- Q&A: Would Too Much Grease in a Trailer Hub Cause the Grease Caps to Fall Off
- Video: Demco Hydraulic Brake Actuator Reverse Lockout Solenoid Review
- Article: How to Tell the Weight Rating of a Trailer Axle
- Video: etrailer Trailer Brakes AKBRKR-MC Review