Wiring Harness For A 2023 Kia Telluride

Question

Question:

For a 2023 kia telluride what is the custom fit wire harness for the hitch ?

asked by: Kelly

0

Expert Reply:

The custom wiring harness for your 2023 Kia Telluride is the Curt Wiring Harness # C59236.

expert reply by: Noah E

0

Answer 1

The trailer hitch and trailer wiring harness you need for your 2023 Hyundai Palisade are the following: - Curt Trailer Hitch Receiver #C13427 - T-Connector Vehicle Wiring Harness #C43FV I went ahead and verified these fits directly with the…

view full answer...

Answer 2

Let's start with the hitch for your 2023 Kia Telluride, and the correct fit is the etrailer Trailer Hitch Receiver #e45ZR. As for the wiring harness, there is not a plug-and-play option so you'll have to hardwire a 4-way in, the Curt…

view full answer...

Answer 3

There are two trailer hitches that will fit your 2023 Hyundai Palisade XRT, the Curt and etrailer: - etrailer Trailer Hitch Receiver #e95ZR - Curt Trailer Hitch Receiver #C13427 I went through our customer reviews for you and found a photo that a…

view full answer...

Answer 4

I recommend the etrailer Trailer Hitch Receiver #e95ZR for your 2023 Hyundai Palisade. I like the etrailer hitch over the others that we offer because it has a hidden design that will give you a clean off the factory look when the hitch is installed.…

view full answer...

Answer 5

There is one hitch available for the 2023 Kia Telluride. It is the etrailer Hitch item #e45ZR. This hitch is custom fit and bolts to your Telluride with included hardware. I confirmed with the manufacturer this also fits the 4WD models. I really like…

view full answer...

Answer 6

What you can do to have a 7-way/4-way combo at the rear of your 2022 Hyundai Palisade is to start with the 7-way kit part #C68JR that you referenced and then instead use the 7-way/4-way socket part #30955 in place of the included 7-way and you'd…

view full answer...

Answer 7

It is very, very likely that the issue with no power to the 12 volt pin of the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector #C68JR is due to a fuse either having been blown or not inserted, so definitely…

view full answer...

Answer 8

The Curt #C13427 and etrailer.com #e95ZR hitches available for your 2022 Hyundai Palisade are indeed very similar to each other. Both are Class III hitches, have the same 5,000 pound towing and 750 pound tongue weight capacities, and are American…

view full answer...

Answer 9

Yes, Per the manufacturer The etrailer Trailer Hitch Receiver #e95ZR is confirmed to fit behind the removable cover on the 2023 Hyundai Palisade. The wiring harness has been changed, The Curt Wiring Harness #CU94FR is confirmed to fit your 2023…

view full answer...

Answer 10

Installation of a wiring harness like the Curt T-Connector Vehicle Wiring Harness #CU94FR is not a requirement to get the etrailer Trailer Hitch Receiver #e95ZR installed on your 2022 Hyundai Palisade. The wiring harness is installed to provide power…

view full answer...

Answer 11

Yes, we do have a hitch and wiring harness available for the 2023 Kia Telluride. The etrailer Hitch item #e45ZR is confirmed to fit the 2023 model. It is custom fit and bolts directly to your Telluride with included hardware. This is a class III…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Wiring Harness For A 2023 Kia Telluride

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching