Which Orientation are Leaf Springs Installed In
Question:
First timer..... which measurement goes forward towards the tounge? Is it the shorter side C or the longer side? Or does it matter as long as both springs are in the same direction? Thank you in advance
asked by: Jamie
Expert Reply:
The 12-5/8 inch dimension from the spring eye to the cinch bolt of the # e44SR leaf spring (dimension C in the diagram) is symmetrical, so the spring could be mounted in either direction. Customarily, the end of the spring with the band wrapped around it is placed forward of the axle, closest to the front of the trailer, but it really makes no difference. On leaf springs that are asymmetrical, the shorter distance would be forward of the axle.
Product Page this Question was Asked From
4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Trailer Leaf Springs
- Double Eye Springs
- 5000 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 25-1/4 Inch Long
- Painted
- etrailer
more information >
Continue Researching
- Search Results: marine grease
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Shop: Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Search Results: bunk hardware
- Shop: Mounting Bracket for Optronics 90 Series or 91 Series Trailer Lights - Self-Grounding - Black
- Shop: Right Angle 2-Wire Pigtail for Optronics Trailer Lights - 2-Prong PL-10 Plug - 6" Lead
- Search Results: bolster brackets
- Video: Review of CE Smith Trailer Hubs and Drums - Idler Hub - CE13515
- Video: CE Smith Trailer Hubs and Drums CE13215 Review
- Q&A: Trailer Hub Recommendation that has Inner Bearing L68148 and Outer Bearing L44649
- Search Results: grease
- Search Results: galvanized paint
- Search Results: hubs
- Search Results: bearing buddy 1980
- Video: Review of CE Smith Boat Trailer Parts - Bunks - CE10196G-4
- Q&A: How Tight Should Spindle Castle Nuts be Tightened
- Video: CargoSmart E-Track and X-Track System Large J-Hook Review
- Video: TruRyde Double-Eye Springs Curved Equalizer Installation
- Shop: RV Exterior Lighting
- Shop: RV Interior Lighting
- Video: CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE26233-34GA Review
- Video: Optronics LED Combination Trailer Tail Light Kit Review
- Q&A: Replacement Leaf Springs for Tandem Axle Trailer
- Q&A: Can 4-Leaf Spring for 5,000 Pound Axle Be Replaced With 5-Leaf Spring for 6,000 Pound Axle
- Q&A: Will 25-1/4 Inch 5,000 lb Leaf Springs Work for Old Springs That Measure 26 Inches
- Q&A: Recommended Leaf Spring Replacement For A 2019 Dutchmen Kodiak Ultra-Lite 283BHSL
- Q&A: What is The Difference Between Having Trailer Axles Above or Below the Leaf Springs