Trailer Hub Recommendation that has Inner Bearing L68148 and Outer Bearing L44649
Question:
Which hub to purchase its 5 lug x 4.5inch bolt circle using an inner bearing L 68148 and an outer bearing 44649
asked by: Eric R
0
Expert Reply:
The trailer hub part # 84545UC1-EZ would be the correct trailer hub you would need as it uses an inner bearing of # L68149 and an outer bearing of # L44649 and has the bolt pattern 5 on 4-1/2 inches.
expert reply by:
Jameson C
0
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- EZ Lube
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Q&A: Is There a Replacement for a Trimark 030-0900 Door Latch
- Shop: Ventline Vanair Trailer Roof Vent w/ 12V Fan - 6-1/4" Diameter - Smoke
- Search Results: marine grease
- Shop: Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: LubriMatic LMX Industrial Strength Grease - 14 oz. Cartridge
- Search Results: backup camera
- Search Results: l44649 bearing kit
- Shop: Trailer Hitch
- Video: TruRyde Bearing Kit for #84 Spindle Installation
- Video: Draw-Tite Max-Frame Trailer Hitch Installation - 2022 Tesla Model Y
- Search Results: 8 inch rollers
- Search Results: grease
- Search Results: galvanized paint
- Search Results: bearing buddy 1980
- Video: Review of CE Smith Trailer Hubs and Drums - Idler Hub - CE13515
- Video: CE Smith Trailer Hubs and Drums CE13215 Review
- Video: Review of CE Smith Boat Trailer Parts - Bunks - CE10196G-4
- Video: Review of Dexter Trailer Leaf Spring Suspension - HD Suspension Upgrade Kit Single Axle - K71-358-00
- Q&A: Which Orientation are Leaf Springs Installed In
- Q&A: How Tight Should Spindle Castle Nuts be Tightened
- Video: CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE26233-34GA Review
- Q&A: Inner and Outer Bearing and Grease Seal for Older Trailer
- Q&A: Recommended 5 on 4-1/2 Hub for 3,500 lbs Axles w/ L68149 Inner Bearing and L44649 Outer Bearing
- Q&A: Availability of Trailer Hub for 3,500 lb Axle that has 5 on 4-1/2 inch Bolt Pattern
- Article: Trailer Wiring Diagrams
- Q&A: Baby Moon Cover that Fits 15 inch Trailer Wheel