Replacement Door Hinges for a 2019 Forest River Sandpiper 5th Wheel

Question

Question:

Looking for rv entry doorhinges for 2019 sandpiper fkok 5th wheel.in black you show item in white can you help

asked by: Todd R

0

Expert Reply:

I'd be happy to help out!

The Replacement Entry Door Hinge for RV - 6 Leaf - White # LC198295 you were looking at for your 2019 Forest River Sandpiper 5th wheel is found in black as part # LC95VR on our site.

Attached are some review videos for you to check out!

expert reply by: Jon G

0

Answer 1

The replacement hinge part #LC198295 is what you are looking for as it's not a friction hinge that stops the door from moving and is correct size for your 2022 Keystone Cougar.

view full answer...

Answer 2

You can use the Replacement Controlled Motion Hinge for RV Entry Door - 6 Leaf - Black #LC95VR to replace the hinges on your door. They come in a quantity of 1 so you will need to make sure that you buy enough to support your door.

view full answer...

Answer 3

Although we do not have the instructions for the Replacement Controlled Motion Hinge for RV Entry Door #LC95VR that you mention I was able to get in contact with Lippert, and they were able to send over the instructions. The instructions are as…

view full answer...

Answer 4

There's no guide to tell us what hinges on your trailer are friction hinges so you would have to physically remove them from the door to test them. A friction hinge will require quite a bit of force whereas a regular hinge will freely rotate. We…

view full answer...

Answer 5

We do carry a variety of replacement hinges that should work great with your 2011 Tiffin Allegro motorhome like the: -Replacement Entry Door Hinge for RV - 6 Leaf - White #LC198295 which has a total height of 9-1/4", and leaf widths of…

view full answer...

Answer 6

The Replacement Entry Door Hinge for RV - 6 Leaf - White #LC198295 could very well be what you're needing for your 2001 Fleetwood Expedition 36T Diesel but even if you sent me pictures of your current hinges you would be the better judge of that…

view full answer...

Answer 7

The Replacement Controlled Motion Hinge for RV Entry Door #LC95VR is only compatible with Lippert entry doors. As long as you have a Lippert entry door then you can use the Replacement Controlled Motion Hinge for RV Entry Door #LC95VR in place of the…

view full answer...

Answer 8

I checked with Lippert and if the Ground Control 3.0 part #LC675817 loses power it does not lose the level settings. Once it's set it's set. Here's the example they used: "The controller is like your home computer or cell phone. Once…

view full answer...

Answer 9

I sent your picture to my tech contact at Lippert and they responded with saying that the mounting brackets are designed to go behind and under the cross shaft of the slide out. If you check out the picture I attached you'll see how it would fit…

view full answer...

Answer 10

If you are wanting to install the MORryde StepAbove RV Steps #MR98RR you would need to remove the shock rod/gas strut because it will interfere with the step clearance. You can use the Replacement Controlled Motion Hinge for RV Entry Door #LC95VR…

view full answer...

Answer 11

The Replacement Controlled Motion Hinge #LC95VR will still allow the door to move but it will be more restricted in its movement. The hinge adds friction to the door so you are able to open it and leave it in different positions without moving in…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...