Is The Pace Edwards Switchblade Retractable Tonneau Cover Compatible With 5th Wheel Hitches

Question

Question:

How far down would my fifthwheel hitch need to be below the bed rails for this to work on my 2022 silverado 2500 short bed?

asked by: Weston W

0

Expert Reply:

The Pace Edwards Switchblade Metal Retractable Hard Tonneau Cover # PE93CV sits right inline with top of your bedrails so the 5th wheel hitch would just need to be lower than the bedrails of your 2022 Chevy Silverado to allow the cover to slide down the tracks.

expert reply by: Kevin C

0

Answer 1

Based on the capacities you mentioned of your 2021 Chevrolet Silverado 2500HD with the 6.6L engine you will not be over loading as you have a towing capacity of 18500lbs and your trailer only comes in at 13500lbs max. You will likely have some squat…

view full answer...

Answer 2

The Pace Edwards JackRabbit Retractable Hard Tonneau Cover w Explorer Rails - Aluminum and Vinyl - Black, part #PE76CV, does sit a bit more than an inch above the top of the 2020 Chevy Silverado 3500. Unfortunately, that is going to be the case with…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hi Mark; thanks for the question and I have some good news for you as we have the exact 5th wheel to gooseneck adapter to replace the Turning Point pin box on your Jayco Eagle HT 30.5 CKTS. The correct part is the following: - Gen-Y Hitch Shock…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 9

The "KTC 7600" stamped on the brake pad doesn't look to be a part number, so I can't cross reference it, but we do know you have Kodiak ceramic brake pads. So to determine the correct brake pads, all you need to do is match up…

view full answer...

Answer 10

Yes, the TrackTowers part #Y52AV does fit into Yakima HD tracks like what you have installed on your trailer.

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Thanks for the pictures! To replace your Curt Turning Point you will want the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item #GY48GR. This was made specifically to replace the Turning Point pin boxes. You will also need the Safety…

view full answer...

Is The Pace Edwards Switchblade Retractable Tonneau Cover Compatible With 5th Wheel Hitches

Product Page this Question was Asked From

Continue Researching