Does Replacement Install Hardware Kit RHK Replace Curt C31083 Hardware

Question

Question:

Hi, Does it work with the Curt C31083 ? I got a used Curt C31083 without any nuts. Thanks,

asked by: Tim H

0

Expert Reply:

Yes, the replacement hardware kit part # RHK does also work with the Curt front hitch part # C31083. We will ship you out all of the replacement hardware for this front hitch.

expert reply by: Jameson C

0

Answer 1

On your 2020 Ford F-150 the Curt Front Mount Trailer Hitch #C31083 will sit further up than the Draw-Tite alternative and actually won't affect the truck's ground clearance at all. The 2" receiver on the hitch will protrude right through…

view full answer...

Answer 2

The Curt Front Mount Hitch #C31083 for your 2020 Ford F-150 actually won't affect the truck's ground clearance at all. This is because the 2" receiver will protrude right through the bottom of the air dam, maintaining the F-150's…

view full answer...

Answer 3

The Curt front hitch part #C31083 is a USA-made front hitch confirmed as a fit for your 2018 Ford F-150. The line pull rating for this hitch is 9,000 lbs and the vertical load limit is 500 lbs.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

You can fit the #C31083 on your 2023 Ford F-150 with the FX4 package but you will need to make modifications. The skid plate can be reinstalled but it will have to be trimmed to get it to fit. Technically the auto air damn can also be modified to…

view full answer...

Answer 6

The good news is that neither the Curt #C31083 or the Draw-Tite #65067 front mount trailer hitches will reduce the ground clearance on your 2018 Ford F-150. If you want a receiver that sits above the lowest piece of fascia then the Curt requires that…

view full answer...

Answer 7

It appears you are going to need to have a front mount trailer hitch receiver fabricated for your 2023 or 2024 Ford Expedition as I do not see a custom fit aftermarket option available. We do have the Weld-On 2" Receiver #E17 which will aid in…

view full answer...

Does Replacement Install Hardware Kit RHK Replace Curt C31083 Hardware

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching