Will Curt Hitch Fit 2023 Ford F-150 With FX4 Package

Question

Question:

Will this work with the FX4 skid plates on a 2023 F150? I don’t see it mentioned for the Curt but the Draw-Tite says it doesn’t work with skid plates. Also, can the auto lowering air dam be trimmed like the Draw-Tite or does it actually need to be removed?

asked by: Eulus D

0

Expert Reply:

You can fit the # C31083 on your 2023 Ford F-150 with the FX4 package but you will need to make modifications. The skid plate can be reinstalled but it will have to be trimmed to get it to fit. Technically the auto air damn can also be modified to make this fit just like the Draw-Tite. We don't have instructions for these modifications so it will be up to you to make it work.

expert reply by: Robin H

0

Eulus D.

3/25/2024

Thank you!

Reply

Answer 1

The Draw-Tite Front Mount Trailer Hitch Receiver #65067 will actually work with the auto deploying air dam on your 2022 Ford F-150, although there is some trimming of the air dam and the reinforcement bracket to get it installed (see attached photo…

view full answer...

Answer 2

You actually don't really lose any ground clearance when you have the front hitch part #65067 installed on your 2016 Ford F-150. The lower air dam on the front of the truck gets trimmed out to allow the hitch to fit at basically the same height…

view full answer...

Answer 3

The Draw Tite Front Hitch part #65067 does fit with the auto deploying air dam of your 2021 Ford F-150.

view full answer...

Answer 4

I don't have an exact measurement for ground clearance on the Curt #C31083 front mounted recevier to provide you with, but as shown in these photos, the underside of the bumper fascia sits lower than the receiver, so the receiver won't…

view full answer...

Answer 5

For your 2020 Ford F-150 XLT the best front mount hitch is the Curt #C31083 because it's going to sit just a tad higher than the Draw-Tite alternative for better ground clearance. The 2" receiver for the Curt hitch will actually protrude…

view full answer...

Answer 6

The correct Roadactive kit that fits your 2023 Ford F-150 is the part #RAS3611-YHD. I really like the RAS kits as they basically don't have any downsides. You get the adjustable support, an easy install, no maintenance, and actually improves…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hey Michael, thanks for reaching out! The EcoHitch #EH57FR sits a little higher than the Curt #C52NR so it will give you better ground clearance for your 2024 Chevy Silverado 2500. The EcoHitch is a bit more recessed into the front bumper than the…

view full answer...

Answer 9

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 10

For suspension enhancement on your 2022 Ford F-150, I recommend the RoadActive Suspension Custom Leaf Spring Enhancement Kit - Heavy Duty #RAS3611-YHD. The RoadActive leaf spring enhancement is a better choice than air bags because the leaf spring…

view full answer...

Answer 11

Yes, it will! The B&W Continuum Weight Distribution Head Assembly item #BW48FR will work perfectly with the B&W Continuum Weight Distribution System item #BW28FR.

view full answer...

Answer 12

For a hard folding tonneau cover that is rack compatible on your 2023 Ford F-150 I recommend the BAKFlip MX4 Hard Tonneau Cover. You will need one of the following based on your bed length: -BAKFlip MX4 #BAK76FR (5-1/2' bed) -BAKFlip MX4 #BAK46FR…

view full answer...

Will Curt Hitch Fit 2023 Ford F-150 With FX4 Package

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching