Is There a 2 Receiver and 4-Way Vehicle Wiring Harness Confirmed to Fit a 2023 Honda CR-V?

Question

Question:

Have any idea when you will come out with a 2 hitch for a 2023 Honda CR-V?

asked by: Chris C

0

Expert Reply:

Curt has just confirmed the 2" Trailer Hitch Receiver # C13397 as a fit for your 2023 Honda CR-V. This receiver will fit all trims. They have also confirmed the Curt T-Connector Vehicle Wiring Harness # C56370 to fit if you have an AWD powertrain. If you have a different powertrain please let me know and I will let you know your options.

expert reply by: Bud M

0

Answer 1

Yes, the etrailer hitch part #e98848 does fit your 2024 Honda CR-V Touring. It has great towing capacities and is mostly hidden so I recommend it highly for you.

view full answer...

Answer 2

To add a hitch to your 2024 Honda CR-V, I recommend the Curt item #C13397. This hitch is custom fit and bolts to your Honda with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 525…

view full answer...

Answer 3

I checked with Draw-Tite and they list the Draw-Tite Max-Frame Trailer Hitch Receiver part #DT79MR as a fit for a 2023 Honda CR-V all models so you will be good to go with a Sport Touring. I took a look at some of the review and there were…

view full answer...

Answer 4

I checked with the manufacturer and the Draw-Tite Max-Frame Trailer Hitch Receiver part #DT79MR is a confirmed fit for a 2023 Honda CR-V Hybrid. It offers a bolt-on fit with no drilling required. It has a 2" receiver that can be used for…

view full answer...

Answer 5

Thanks for the picture! That is definitely not the connector you are looking for. I have attached a picture below that will show you exactly where to look to find the connector. You are indeed looking for a white connector, but with a red tip. I…

view full answer...

Answer 6

The etrailer Trailer Hitch Receiver part #e98848 is a fit for a 2023 Honda CR-V Hybrid AWD Sport and it's what I recommend using. I know this may be a surprise but hybrid models typically have the same rear sub-frame as the non hybrid models so…

view full answer...

Answer 7

To trim the bumper fascia on your 2019 Honda CR-V when installing the etrailer.com Trailer Hitch Receiver #e98848 you can use a pair of snips or simply a sharp utility knife. The material isn't too thick so it's not going to take a lot of…

view full answer...

Answer 8

The etrailer.com Trailer Hitch Receiver #e98848 does require some fascia to be trimmed during installation (it's what allows for the hitch's sleek hidden design) and I can absolutely help you with this process. I have attached an image from…

view full answer...

Answer 9

I recommend the etrailer Trailer Hitch Receiver, #e98848. This is a custom fit Class III, with a 2"x2" receiver opening that is rated at a full 525 lbs. tongue weight and protected with a matte black finish for added durability. This is a…

view full answer...

Answer 10

The Curt Trailer Hitch Receiver #C12169 and the #C13397 have both been confirmed by Curt to fit the new 2023 Honda CR-V. This is most likely due to while they have updated the interior and exterior of the 2023 model year it is likely on the same…

view full answer...

Answer 11

I'd recommend the US made Curt Class III hitch, part #C13397. Our install techs have confirmed that the hitch is a fit for the Hybrid model CR-V. If you should have the need to tow with the hitch at some point in the future, you'll need to…

view full answer...

Answer 12

Honda offers a Power Liftgate Sensor Relocation Bracket as part #08U59-TLA-100A for your 2019 Honda CR-V for when you install a hitch like the Draw Tite part #76128 so that the hands free lift gate will still function properly. That said, we've…

view full answer...

Is There a 2 Receiver and 4-Way Vehicle Wiring Harness Confirmed to Fit a 2023 Honda CR-V?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching