Trailer Hitch that Fits 2024 Honda CR-V Touring

Question

Question:

Do you guys have a hitch that fits my 2024 Honda CR-V Touring?

asked by: Vicki

0

Expert Reply:

Yes, the etrailer hitch part # e98848 does fit your 2024 Honda CR-V Touring. It has great towing capacities and is mostly hidden so I recommend it highly for you.

expert reply by: Jameson C

0

Answer 1

The etrailer class 3 hitch #e98848 will affect the hands free lift gate sensor on a 2024 Honda CR-V. It is difficult to give a firm answer to this question, as we have received varying reports on the functionality of the sensor with the hitch…

view full answer...

Answer 2

Yes, we do have a hitch that will fit your 2022 Honda CR-V Hybrid Touring. It is the EcoHitch Hidden Trailer Hitch Receiver item #306-X7345. This hitch is custom fit and bolts directly to your CR-V's frame with included hardware. If you look…

view full answer...

Answer 3

Thanks for the picture! That is definitely not the connector you are looking for. I have attached a picture below that will show you exactly where to look to find the connector. You are indeed looking for a white connector, but with a red tip. I have…

view full answer...

Answer 4

The etrailer Trailer Hitch Receiver part #e98848 is a fit for a 2023 Honda CR-V Hybrid AWD Sport and it's what I recommend using. I know this may be a surprise but hybrid models typically have the same rear sub-frame as the non hybrid models so…

view full answer...

Answer 5

To trim the bumper fascia on your 2019 Honda CR-V when installing the etrailer.com Trailer Hitch Receiver #e98848 you can use a pair of snips or simply a sharp utility knife. The material isn't too thick so it's not going to take a lot of…

view full answer...

Answer 6

Curt has just confirmed the 2" Trailer Hitch Receiver #C13397 as a fit for your 2023 Honda CR-V. This receiver will fit all trims. They have also confirmed the Curt T-Connector Vehicle Wiring Harness #C56370 to fit if you have an AWD powertrain.…

view full answer...

Answer 7

There is a wide range of weights when it comes to 24 foot pontoon boats. They can weigh anywhere from 2200 lbs. up to 4000ish pounds. Meaning maybe 800-1000 lbs of tongue weight. With that said the jack only needs to take care of a little more than…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 10

It is going well and I'd be happy to help you! For a 2024 Honda CR-V Hybrid Sport, I recommend the etrailer Hitch item #e98848 you were looking at. We have confirmed through our vendor and customer reviews that this hitch will fit the hybrid…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Trailer Hitch that Fits 2024 Honda CR-V Touring

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching