How to Get Correct Replacement Double Sided Purple Grip Keys for Camper Trailer

Question

Question:

I simply need copies of my existing camper keys. The style is the same purple gripped, double sided slam door lock as I see on your site. I brought my keys to a local locksmith, they sent me to you.

asked by: Christopher J

1

Helpful Expert Reply:

In order to help you find the correct replacement keys for your camper we'd need to know both the brand of lock you have and the key code. The Replacement Key for Global Link RV Locks part # 295-000036 for example is designed for Global Link branded locks which use a 310 key code. I have attached a full list of all our replacement keys below but if you can get me both the make and key number I can see if we have an option for you. The Global Link keys have a purple grip with double sided key cut

expert reply by: Conner L

1

How to Get Correct Replacement Double Sided Purple Grip Keys for Camper Trailer
(click to enlarge)

Answer 1

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…

view full answer...

Answer 2

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

I spoke to my contact at Horizon Global. He said it is acceptable to mount the Bulldog Powered-Drive Kit #BD1824200100 to the slave jack itself. He also said that if you need to switch the motor wires to make it work correctly, that would be fine, as…

view full answer...

Answer 5

What you are wanting to do is very possible with the GO Power Solar Panel kit part #34273836. You could mount it on your pin box and then run the wiring to your batteries via an SAE connector. We don't have an SAE connector adapter but they are…

view full answer...

Answer 6

The typical tire should run about 158 degrees (Farenheidt) once you get going down the road, but this can vary greatly depending on the weight of the trailer, how fast you're traveling, and also driving habits. So while 158 is probably…

view full answer...

Answer 7

I have spoken with Lippert about the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System part #LC675817 in they past and they informed me that the most important aspect is that the battery/batteries are sufficiently charged, between 12.4…

view full answer...

Answer 8

The caliper bracket you are looking for is the Replacement Mounting Bracket #KCMB12D which is compatible with the 5 bolt mounting flange you have as well as the 225 Kodiak Dacromet calipers you have as well. Then for a bolt kit you'd want the…

view full answer...

Answer 9

You would not be able to charge your battery through the wiring on your 4-way trailer connector. Since your truck has a 7-way connector, you could maintain the power to the battery but not charge it. To begin, you would need to cut off your 4-way…

view full answer...

Answer 10

The correct Roadmaster base plates for your 2007 Toyota Tacoma are the following: - Direct-Connect #1175-3 - Crossbar-Style #1175-1 If your Roadmaster tow bar has individual joints with bolts, like what we see pictured with the Falcon All-Terrain Tow…

view full answer...

Answer 11

In the trailer world GTW stands for Gross Trailer Weight, and TW means tongue weight. Gross trailer weight is the entire weight of the trailer and tongue weight is the amount of vertical load that is on the coupler of the trailer. Basically how the…

view full answer...

Answer 12

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

How to Get Correct Replacement Double Sided Purple Grip Keys for Camper Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching