Hitch Plate Options for a 2021 International MV607 Crew Cab

Question

Question:

I have a 2021 international MV607 crew cab that I’m trying to find a hitch plate for, do you have one that works and if so what is the part number? Thanks

asked by: Darran

0

Expert Reply:

We do have a variety of hitch plates available that you can install on your 2021 International MV607 Crew Cab. Some of them are custom fits that require fabrication, like the 5/8" x 34-1/2" x 22-1/2" # 3371809043, and others are like the Hitch Plate Bumper # 3371809055.

I'm not 100% sure what you'll be needing since we don't have any custom fit options for your truck but I'm linking our selection for you to filter through so you can find the one you believe will fit your vehicle best.

expert reply by: Jon G

0

Answer 1

I went to our warehouse and measured the Buyers Products 50 Ton Air Compensated Pintle Hook #337PH50 to get the height dimensions. The overall height of the pintle when open is 12" and when closed is 9-1/2". I also took a measurement for…

view full answer...

Answer 2

I do have an option for you but the Curt Trailer Hitch Receiver part #C15800 is designed for passenger vehicles like the Ram 3500, Chevrolet Silverado 3500, and GMC Sierra 3500 so it will not fit your 2009 Volvo D13. However, what you can use is the…

view full answer...

Answer 3

The Buyers Products #3371809042 measures 9-1/2" on the vertical side with the remaining height being 6" down to the bottom. The #3371809043 measures 14-1/2" on the vertical side with 8" of remaining height down to the bottom of…

view full answer...

Answer 4

Curt does not have a minimum plate thickness that they recommend for the #C48231 to ensure its full capacity, instead they recommend attaching it to a surface that is also rated for as much capacity as needed. So, if the bumper/plate is rated for 60k…

view full answer...

Answer 5

The Buyers Products 50 Ton Air Compensated Pintle Hook #337PH50 has a bolt pattern that is 5" on center from the left to right holes. The Top to middle holes are 2-3/8" on center and the middle to bottom holes are 2-1/8" on center. The…

view full answer...

Answer 6

I have a solution for you that is a little higher capacity than the #AM10501 that you asked about. You could use the ST235/85-16 tires in a load range G such as #TTWPRG235R16 which is rated for 4,400 pounds at 110 psi. Four of these would have an…

view full answer...

Answer 7

I have spoken with Buyers Products in the past about the Buyers Products Fabricators Hitch Plate part #3371809043 and they have stated that the reason that they do not rate the plate for a specific weight capacity is becuase this will largely be…

view full answer...

Hitch Plate Options for a 2021 International MV607 Crew Cab

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching