Correct Installation Hardware for etrailer 6-1/4" Stabilizer Drop Leg Jack

Question

Question:

I want to add mounting hardware to 6-1/4 inch stabilizer jacks for my trailer. But I cant find the mounting hardware on here. Can you please help me with this? Thanks.

asked by: Joseph S

0

Expert Reply:

To install the Stabilizer Jacks - 6-1/4" Drop Leg Travel # TJ01RT-HD you'll need to get 7/16" mounting hardware. In the attached review/installation video we use #14 self-tapping screws to mount these jacks into the frame of the trailer.

If you jump to the 3:14 minute mark of the linked video you'll see how we install this on a trailer.

expert reply by: Jon G

0

Answer 1

There many possible ways to mount a stabilizer jack such as the #TJ01RT-HD you looked at. Mounting them in the orientation shown the diagram would tend to work a bit better to stabilize the trailer against side to side movement, while having the…

view full answer...

Answer 2

The Stabilizer Jacks - 6-1/4" Drop Leg Travel - 18" Extension - 650 lbs - Qty 2 #TJ01RT-HD does not come with installation hardware. The two stabilizer jacks do come with the steel rod and the bolt holes to mount are 7/16 inches in diameter…

view full answer...

Answer 3

The a-frame trailer jacks all use a standard mounting pattern and center hole size for the most part so although I am not quite sure what you are measuring I can confirm we have options, the Ultimate Trailer Jack part #322-RDJ-2K is a good one…

view full answer...

Answer 4

The Ultimate Trailer Jack part #322-RDJ-2K is the lowest profile trailer jack and would work great for you. Since the bracket is adjustable you can set the height of the jack at a very low height as needed.

view full answer...

Answer 5

All of the relevant dimensions and capacities are the same between the Pro Series Wheel Caster #PS1400750340 and the #JC-102 that you referenced. They basically would fit the same applications as they are both 1,200 lb capacity wheel casters with a 6…

view full answer...

Answer 6

The bolt spacing of the etrailer.com stabilizer jacks #TJ01RT-HD is 3 inches on center and has 7/16 inch diameter holes. The Atwood stabilizer jacks are being discontinued as they were bought out by Lippert. The bolt holes are 3-1/2 inches on center…

view full answer...

Answer 7

As you can see by the accompanying photos, the Stallion Stabilizer Jacks #288-01892-2 are very similar to the Atwood 82298 jacks. They are drop leg jacks with 7 inches of drop leg travel, an extended height of 22-1/4 inches, a lift capacity of 650…

view full answer...

Answer 8

Quality-wise there isn't much of a difference between the etrailer.com stabilizer jacks part #TJ01RT-HD and the Stallion Stabilizer Jacks #288-01892-2 that you also mentioned. I'd recommend going with the kit that matches the height…

view full answer...

Answer 9

I went out to our warehouse and got the following dimensions for the Stabilizer Jacks #TJ01RT-HD in the stowed position. I have included an image below so you can see the points I measured from. The overall length is 12-3/8" long, 4-3/8"…

view full answer...

Answer 10

Best option for you would be to have the Stabilizer Jacks #TJ01RT-HD welded to your trailer frame. That will give you the most secure attachment. A local welder to you should have no problem attaching these. Would probably be the easiest job of his…

view full answer...

Answer 11

According to the installation instructions, the torque specification for the 2-5/16" ball that comes with the Blue Ox 2-Point Weight Distribution w/ Sway Control - 6-Hole Shank - 10K GTW, 1.2K TW item #BLU75FR is 260 ft lbs. The socket you will…

view full answer...

Answer 12

The Stabilizer Jacks - 6-1/4" Drop Leg Travel #TJ01RT-HD that you mentioned are not spring loaded. This jack uses a series of internal steel notches to be able to give you the perfect height adjustment for your trailer, while still providing a…

view full answer...

Correct Installation Hardware for etrailer 6-1/4" Stabilizer Drop Leg Jack

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching