Timbren Rear Kit Recommendation for a 2022 Ford F-150 Raptor

Question

Question:

What Timbren set should I install on my 2022 Ford F-150 Raptor?

asked by: Mason

0

Expert Reply:

Thanks for reaching out!

The difference between the Timbren kits are the weight ratings and ultimately how you'll be using them for your 2022 Ford F-150 Raptor:

Standard Timbren Kit - # T75MR - 3,000 lb rating
Off-Road Timbren Kit - # T73MR - 7,000 lb rating

If you plan on using your Raptor for off-road situations (which is really what the Raptor was designed for) then you'll want the Off-Road kit rated at 7K since it's more rugged. If you won't be going off-road very often then you'll want the standard 3K kit instead since it will offer better ride quality on pavement.

Attached are some review videos for you to check out!

expert reply by: Jon G

0

Answer 1

Options are limited for the 2023 Ford F-150 Raptor but you can use the Timbren Suspension Enhancement System #T75MR. These have a 3,000 lb capacity and will provide you with the additional support you're looking for. They also help reduce…

view full answer...

Answer 2

To level out the rear end of your 2022 Raptor when you are towing a trailer, I recommend the Timbren Suspension Enhancement System item #T75MR. These progressive load springs have a 3,000 lbs load leveling capacity. The progressive load control…

view full answer...

Answer 3

Hey Tarek, for your 2023 Ford Raptor I recommend checking out the Timbren Suspension Enhancement System #T75MR. This suspension enhancement system has a load leveling capacity of 3,000 lbs, will increase stability while reducing sag, and will…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes Tarek, the Timbren Suspension Enhancement System #T75MR will work fine with your 2023 Ford Raptor.

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 10

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...