Recommended Trailer Hitch/Trailer Wiring For A 2023 Hyundai Palisade

Question

Question:

I am interested in purchasing a trailer hitch and wiring harness for my 2023 Hyundai Palisade. I see that you have a few different options which one would you recommend for my vehicle?

asked by: Amy

0

Expert Reply:

Out of all the hitches that we offer for your 2023 Hyundai Palisade I recommend the etrailer Trailer Hitch Receiver # e95ZR. I like the etrailer hitch over the other hitches confirmed for your vehicle because it has a matte black powder coating that will help reduce visible scratches and scuffs that you would get from flying rocks or road debris while towing. The other hitches have a gloss black powder coating that will make the scratches more visible.

For a wiring harness I recommend the Curt T-Connector # C43FV. You can also use the Curt Towing Starter Kit # C45554 which comes with a ball mount, ball, and locking hitch pin.

I linked an installation video below on the etrailer hitch being installed onto a 2022 Hyundai Palisade. The installation process will be the same for your 2023 Hyundai Palisade.

expert reply by: Noah E

0

Answer 1

The Curt T-Connector Vehicle Wiring Harness #CU94FR is designed to connect to the factory tow package wiring which was removed from your 2023 Hyundai Palisade. This connector was included on all Palisades in previous years. For your Palisade you will…

view full answer...

Answer 2

The 2023 Hyundai Palisade has a 3 wire taillight setup which is the correct info needed to wire up trailer wiring like the #C59236 that fits your 2023 Hyundai Palisade.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

There is a trailer hitch receiver as well as a 4-way wiring harness that fit your 2022 Jeep Grand Cherokee WL; that said, we don't have any way to reference a VIN so you'll need to confirm if you do have the WL, which is the new model of…

view full answer...

Answer 9

We have both a trailer hitch receiver as well as the wiring you need for your 2024 Hyundai Palisade. I verified both fits directly with the manufacturer for you, and the correct parts are the following: - Curt Trailer Hitch Receiver #C13427 -…

view full answer...

Answer 10

The best hitch for a 2024 Hyundai Tucson is the etrailer Hitch item #e38KR. This hitch is custom fit and bolts to your Tucson with included hardware. It is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 525 lbs…

view full answer...

Answer 11

Item #118701 does not fit a 2023 Hyundai Palisade but I have one that does. It is the Curt T-Connector Vehicle Wiring Harness item #C43FV. This custom-fit T-connector plugs into your Palisade's wiring harness, which is located behind the tail…

view full answer...

Answer 12

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...