Correct Replacement In-Wall 500:1 Slide-Out Motor 287298 for Grand Design RV

Question

Question:

i have a 2021 grand design reflection 278bh, it only has the one slide, but i wanted to get a spare motor for that slide, do you know if the #278298 is the correct motor for that model. or will it work ? Thanks,

asked by: Joe B

0

Expert Reply:

It sounds like you're looking for the Lippert Replacement 500:1 Motor for Electric In-Wall RV Slide-Out System part # LC287298 which is a 500:1 in-wall slide-out motor. If your existing motor looks the same as this and has the same 500:1 rating then it's likely a direct replacement. That said, the only way we can look this up for you would be with the part/model number of your existing slide-out motor. We cannot look this up using the make and model of the trailer unfortunately.

expert reply by: Conner L

0

Answer 1

The only difference between a Lippert slide-out motor with a 300:1 gear ratio and a 500:1 gear ratio, is torque. The 500:1 gear ratio will provide this motor with more torque. As they have the same dimensions and design, you can use the 500:1 gear…

view full answer...

Answer 2

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Answer 3

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

We do carry the Dometic RV Water Heater #DMC74FR which you could use to replace your Atwood G6A-8E 6 gal RV Water Heater, but I highly recommend switching over to a tankless system like the Furrion RV Tankless Water Heater 60,000 BTU #FR98SR. This…

view full answer...

Answer 6

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 7

To replace your Atwood RV Water Heater, Model #GC10A-4E, the direct replacement is the Atwood RV Water Heater - Gas and Electric - part #AT94022. This is the new version of your existing water heater, so it will have all the same features like a…

view full answer...

Answer 8

The best replacement option we offer for a Atwood GC10A-4E Water Heater is tankless, the Furrion RV Tankless Water Heater part #FR68SR. It won't be a direct replacement but still pretty easy nonetheless as they are very similar. That said, you…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

The Carrier Air V RV Air Conditioner is no longer produced so a direct replacement of the same unit is not an option. However, we do have available the two Advent AC models that are designed as replacement units for the Carrier Air V. I recommend…

view full answer...

Answer 11

The piece you're referring to in the #LC26VR kit is called a "shoe". This part is plastic with foam pads on each end that helps cushion the motor bracket as it slides back and forth to either end of the track.

view full answer...

Answer 12

Based on the parts diagram from Winnebago your 2013 Itasca Suncruiser 32H will use the Lippert Replacement 500:1 Motor for Electric In-Wall RV Slide-Out System #LC287298.

view full answer...