What Size Roof Rack Will The Thule Flat Top 724 Ski Rack Fit With Universal Mounting Kit # 7533998?

Question

Question:

Will the Universal Mounting Kit fit a 2017BMW 328 with OEM Aero Cross Bars? I have an old Thule Flat Top 724 4 x Ski Rack with original mounting hardware.

asked by: Tim

0

Expert Reply:

The Thule Flat Top 724 Ski Rack will fit a cross bar up to 3-3/4" wide and 1-1/8" tall with the Mounting Kit # 7533998. If your factory cross bars on your 2017 BMW 328 are taller than 1-1/8" you will need the Thule Xadapt7 # THXADAPT7.

expert reply by: Bud M

0

Answer 1

The hardware you need for your first generation Thule Flat Top Ski Carrier (model number 725) is the Mounting Kit for Thule Flat Top Rooftop Ski and Snowboard Racks #7533998, as you mentioned. You will also need four of the Replacement Round Nut for…

view full answer...

Answer 2

I went ahead and sent the attached images you have of your older Thule Ski carrier to my tech at Thule. Unfortunately, from the pictures alone, he could not identify the specific rack. However, he did say that the Mounting Kit for Thule Flat Top…

view full answer...

Answer 3

Instead of part #THXADAPT12, you'll need part #Xadapt2, which will add channel-mount parts to your carriers and allow it to flush mount on your Thule Aero Bars.

view full answer...

Answer 4

For attaching a Thule 725 ski rack to a set of Thule Aeroblade crossbars the adapter you'd need is the part #Xadapt2 which we have confirmed with Thule. This is only solution we can guarantee will work.

view full answer...

Answer 5

The Replacement QuickAccess Interface Top T-Track Strip, part #1500052989, are available for purchase, but they are not compatible with the AeroBlade crossbars. The only option to have these strips would be to use them with the WingBar Evo crossbars…

view full answer...

Answer 6

First, we need to determine which Thule aero bars you have. The older bars were called Rapid Aero bars and were more symmetrical. The new bars are called AeroBlade bars and look more like a wing. I have included a 3/4 profile picture of the AeroBlade…

view full answer...

Answer 7

The bolts of the #Xadapt2 that you mentioned are M6. For a low profile Thule M6 knob we have the part #753-0783.

view full answer...

Answer 8

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 9

Thank you for the information and the photos! According to what you sent in it looks like you have one of the discontinued Thule Flat Top (TH91724 or TH91725) or Pull Top (TH91726) carriers. These came with universal mounting hardware as well as an…

view full answer...

Answer 10

The mounting kit part #7533998 that you referenced would fit the width of Thule Aeroblade crossbars like the #TH711420.

view full answer...

Answer 11

You may be able to use the Thule SpeedLink Mounting Hardware Assembly #7521241001 by modifying your older generation Thule Ski Carrier 91725. However, I cannot recommend you drill the rivets out as not only will this automatically void your warranty…

view full answer...

Answer 12

You can use either the Thule 2-Wing Knob #753-1897-03 which came on the Thule 725 Ski Carrier or you can use the Round Nut #853-5439 with the Mounting Kit #7533998 you have. You will need 2 of the knobs or nuts per mount or 4 total for the set.

view full answer...

What Size Roof Rack Will The Thule Flat Top 724 Ski Rack Fit With Universal Mounting Kit # 7533998?

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching