Are the QuickAccess Interface T-Track Strips Compatible with the AeroBlade Crossbars

Question

Question:

Hi! Can I replace the rubber strips on my aeroblade by the new rubber strips that go with the WingBar Evo? Will they fit and if so, do you sell them? Thank you!

asked by: PAUL B

0

Expert Reply:

The Replacement QuickAccess Interface Top T-Track Strip, part # 1500052989, are available for purchase, but they are not compatible with the AeroBlade crossbars.

The only option to have these strips would be to use them with the WingBar Evo crossbars like the # TH711420 you referenced.

If you let me know what vehicle you have, I can tell you if these crossbars are an option for you.

I've linked to a video review of the strips below.

expert reply by: Kef G

0

Answer 1

The hardware you need for your first generation Thule Flat Top Ski Carrier (model number 725) is the Mounting Kit for Thule Flat Top Rooftop Ski and Snowboard Racks #7533998, as you mentioned. You will also need four of the Replacement Round Nut for…

view full answer...

Answer 2

Instead of part #THXADAPT12, you'll need part #Xadapt2, which will add channel-mount parts to your carriers and allow it to flush mount on your Thule Aero Bars.

view full answer...

Answer 3

The bolts of the #Xadapt2 that you mentioned are M6. For a low profile Thule M6 knob we have the part #753-0783.

view full answer...

Answer 4

For attaching a Thule 725 ski rack to a set of Thule Aeroblade crossbars the adapter you'd need is the part #Xadapt2 which we have confirmed with Thule. This is only solution we can guarantee will work.

view full answer...

Answer 5

First, we need to determine which Thule aero bars you have. The older bars were called Rapid Aero bars and were more symmetrical. The new bars are called AeroBlade bars and look more like a wing. I have included a 3/4 profile picture of the AeroBlade…

view full answer...

Answer 6

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 7

I went ahead and sent the attached images you have of your older Thule Ski carrier to my tech at Thule. Unfortunately, from the pictures alone, he could not identify the specific rack. However, he did say that the Mounting Kit for Thule Flat Top…

view full answer...

Answer 8

The Thule Flat Top 724 Ski Rack will fit a cross bar up to 3-3/4" wide and 1-1/8" tall with the Mounting Kit #7533998. If your factory cross bars on your 2017 BMW 328 are taller than 1-1/8" you will need the Thule Xadapt7 #THXADAPT7.

view full answer...

Answer 9

You may be able to use the Thule SpeedLink Mounting Hardware Assembly #7521241001 by modifying your older generation Thule Ski Carrier 91725. However, I cannot recommend you drill the rivets out as not only will this automatically void your warranty…

view full answer...

Answer 10

The mounting kit part #7533998 that you referenced would fit the width of Thule Aeroblade crossbars like the #TH711420.

view full answer...

Answer 11

Thank you for the information and the photos! According to what you sent in it looks like you have one of the discontinued Thule Flat Top (TH91724 or TH91725) or Pull Top (TH91726) carriers. These came with universal mounting hardware as well as an…

view full answer...

Answer 12

We do have the replacement rubber strips for the Thule WingBar Evo crossbars, and like you said they are in fact different than the AeroBlade. The correct part for your WingBar crossbars is the following: - Replacement QuickAccess Interface Top…

view full answer...

Are the QuickAccess Interface T-Track Strips Compatible with the AeroBlade Crossbars

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching