Can Pace Edwards UltraGroove Be Used With Yakima OverHaul HD on 2023 GMC Sierra 2500

Question

Question:

I want to add the Pace Edwards UltraGroove to my 2023 Sierra 2500 short bed. I also want to be able to use a ladder rack. I'm looking at the Yakima Overhaul HD. Is it possible to use these two together on the 2023? I appreciate your time.

asked by: Woody

0

Expert Reply:

You can definitely use the Pace Edwards UltraGroove # PE48CV with the Yakima OverHaul HD # Y01151-58 on your 2023 Sierra 2500. In addition to the ladder rack and the tonneau cover you will need the Tonneau Cover Adapter Kit # Y01155. This will let you install the ladder rack with the tonneau cover in place.

expert reply by: Robin H

0

Answer 1

For your 2020 GMC 2500 AT4 with a 6-3/4' Bed with Pace Edwards UltraGroove Metal Tonneau Cover item #PE48CV, I recommend the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack #Y01151-58. Using the Tonneau Cover Adapter Kit for Yakima OverHaul…

view full answer...

Answer 2

Yes. The Yakima Overhaul HD #Y01151-58 is compatible with the Pace Edwards UltraGroove #PE48CV for your 2021 GMC Sierra 2500 with 6-3/4 foot bed when you use the #Y01155 adapter. These would be the correct parts for your truck and is going to give…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hey Mark, since we know your Brinkley Z3100 has the Rhino style pin box, the correct Gen-Y fifth wheel to gooseneck adapter is the part #GY98GR which comes with the auto latch you mentioned wanting as well!

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

The "KTC 7600" stamped on the brake pad doesn't look to be a part number, so I can't cross reference it, but we do know you have Kodiak ceramic brake pads. So to determine the correct brake pads, all you need to do is match up…

view full answer...

Answer 11

You can replace the Lippert Rhino pin box on your Brinkley 5th wheel. The right one though is going to depend on the pin weight of your trailer. Here are the options that will work to replace the Lippert Rhino: - Pin Weight of 1,500 lbs - 3,500 lbs:…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...