Comparing 18x8.50-8 and 4.80/4.00-8 Tires

Question

Question:

What is the difference in 18x8.5-8 and 4.80/4.00/8

asked by: Jeannine

0

Expert Reply:

The 18x8.50-8 # AM40537 is 17.6" in diameter and 8.5" wide. It will fit a 8" diameter x 7" wide wheel. This particular tire is rated for up to 815lbs per tire.

The 4.80/4.00-8 # AM10002 is 16.1" in diameter and 4.6" wide. It will fit a 8" diameter x 3-3/4" wide wheel. This particular tire is rated for up to 590lbs per tire.

expert reply by: Bud M

0

Answer 1

Although its more commonly used on golf carts, as long as the tire's kept properly inflated to 100psi as listed on the sidewall the Kenda #AM1HP60 225/55B12 tire can be used on a trailer. The tires are rated for a 65 mph top speed. I've…

view full answer...

Answer 2

When it comes to The Kenda 205/50-10 Bias Golf Cart Tire with 10 inch White Wheel - 4 on 4 - Load Range B #AM90016 the kit only comes with the tire and rim. The Lug Nuts #AM90049 are sold separately. The lug nut fits 1/2 inch diameter wheel bolts and…

view full answer...

Answer 3

You cannot tow the trailer with the slider hitch in the maneuvering position. The trailer should actually be centered directly over the rear axle or a few inches forward of it but not behind it at all. That will cause all sort of issues such as…

view full answer...

Answer 4

An 18 x 8.50-8 trailer tire measures 17.6" in diameter and 8.5" wide. Since the Kenda 5.70-8 Bias Trailer Tire with 8" White Wheel #AM30120 has a 4 on 4" bolt pattern it will fit your hub, but keep in mind the tire is a bit larger…

view full answer...

Answer 5

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 6

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 9

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 10

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Comparing 18x8.50-8 and 4.80/4.00-8 Tires

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching