5k Rated Trailer Hitch that Fits 2006 Itasca Spirit Class C

Question

Question:

looking for a class 4 or 5 hitch for my 2006 itasca spirit class C motorhome . do you carry a hitch to fit

asked by: Steven M

0

Expert Reply:

For a 5,000 lb trailer hitch that might fit your 2006 Itasca Spirit Class C you'd want the Curt # C13704 which will basically fit all RV frame styles that are between 22 and 66 inches.

expert reply by: Jameson C

0

Answer 1

Just to be sure, the Hopkins harness that you should be using for the 2006 Ford E-series van is #HM47715. Make sure that the factory fuse for the brake controller is installed. Use the van owner's manual to find the fuse and relay locations for…

view full answer...

Answer 2

We offer two adjustable-width frame-mount hitches for your Winnebago that has a 31-inch frame spread. Curt 2-inch hitch #13703 can be bolted or welded on a frame from 22- to 72-inches wide. It offers a 350-lb tongue weight capacity. This item fits on…

view full answer...

Answer 3

For your 2006 Ford E-450 chassis for your Winnebago Outlook, there is not a Class V hitch available. My recommendation is the Adjustable Width Trailer Hitch Receiver for RVs #C13702 which does have a 2 inch receiver and is rated for 5,000 lbs towing…

view full answer...

Answer 4

The way the Curt Trailer Hitch, #13703, mounts to an I-Beam frame is that the top bracket on either side of the hitch attaches to the middle, vertical part of the frame. There are also some installation holes in the horizontal portion of the hitch…

view full answer...

Answer 5

You can absolutely install a trailer hitch onto the back of a travel trailer. We actually have a nice selection of trailer hitches that are designed for this very purpose. I do just recommend contacting the trailer manufacturer to make sure the frame…

view full answer...

Answer 6

The Curt Adjustable Width Trailer Hitch Receiver #C13704 that you referenced should be mounted to the bottom of the I-beam frame on your trailer. This is how the hitch was tested and rated by the manufacturer so altering the brackets so that they sit…

view full answer...

Answer 7

For your Forest River No Boundries 19.3 NoBo, I recommend the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide #C13704. This hitch receiver is rated for tongue weights up to 500 lbs. I can't confirm your bike rack is…

view full answer...

Answer 8

As long as your 2011 Keystone Passport 245RB has a box frame, C-channel frame, or I-beam frame that the frame members are no more than 66" apart, you can use the Curt Adjustable Width Trailer Hitch Receiver for RVs #C13704. This hitch can be…

view full answer...

Answer 9

The best hitch will depend on the distance between the camper's frame members at the rear bumper area. If the camper is equipped with a bumper, you'll also need to be concerned with the drop that the hitch provides, which is the vertical…

view full answer...

Answer 10

I attached two picture for the Curt hitch part #C13704 that have all of the dimensions on it. I believe you also asked for the distance from the crosstube to the front of the mounting bracket. Which if so, that distance is 2 inches. The third picture…

view full answer...

Answer 11

For your 2012 Jayco Jay Flight 26RLS Trailer the Curt Adjustable Width Trailer Hitch #C13704 will work really nicely. This particular Class III hitch is designed specifically for applications like this, as it can be bolted directly to the frame rails…

view full answer...

Answer 12

As long as the width of the frame on your 2011 Forest River Cherokee 235B is between 22 and 68-1/2 inches (measured from outsides) the Adjustable Width Trailer Hitch Receiver for RVs #C13704 will fit and work well for you as it has a 5,000 lb trailer…

view full answer...

5k Rated Trailer Hitch that Fits 2006 Itasca Spirit Class C

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching