Recommended Hitch, Wiring Harness, and Brake Controller for a 2023 Nissan Frontier

Question

Question:

I just got a 2023 Nissan Frontier and I want to add a hitch, 7-way connector, and brake controller. What parts do I need?

asked by: Hugo

0

Expert Reply:

To add a hitch to your 2023 Nissan Frontier you are going to want the Curt Trailer Hitch item # 13241. This hitch is custom fit and bolts to your Frontier with included hardware.

I really like the Curt hitch because it installs behind your rear bumper and the crossbar is completely hidden. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity, and a 500 lbs maximum tongue weight. This towing capacity and tongue weight can be increased to 8,000 lbs and 800 lbs when used with a weight distribution system.

For a 7-way connector you will want the T-One Vehicle Wiring Harness item # 118266. This harness plugs into your factory connection point behind the driver's-side rear bumper to provide a 7-way connector.

To add a brake controller you will want the Redarc Tow-Pro Liberty Brake Controller - Proportional item # RED24FR. This brake controller has a unique installation method where you can mount the control knob on your dash or console and hide the main unit out of sight. This is a proportional brake controller that automatically adjusts your trailer's braking based on the deceleration of your Frontier.

To complete your installalation without cutting or spicing wires you will want the Redarc Plug-and-Play Wiring Harness item # RED39FR. This is a plug in adapter that will allow you to install the Tow-Pro Liberty without cutting or splicing wires.

To round out your towing setup I recommend the Curt Towing Starter Kit for 2" Hitches item # C45534. This towing kit will provide you with a 2" ball and a fixed ball mount with a 3/4" rise and 2" drop. It also includes a hitch pin and clip, hitch receiver lock with keys, hitch cover, and a storage case.

I have linked a couple of pictures below along with some installations video so you can see what this hitch looks like when installed and see the installation process for the parts listed above.

expert reply by: Jerred H

0

2023 Nissan Frontier Curt Hitch
(click to enlarge)

2023 Nissan Frontier Curt hitch
(click to enlarge)

Answer 1

The biggest difference between the two Redarc brake controllers is that the Tow-Pro Elite #RED44FR has a proportional control and user controlled mode you can switch between, while the Tow-Pro Liberty #RED24FR has just the proportional mode. The…

view full answer...

Answer 2

I confirmed with my tech at Redarc that the plug-and-play harness you need for the Tow Pro Elite #RED44FR is the wiring harness #RED39FR. Also, my contact at Redarc informed me that some neighbors report that Nissan actually supply a connector…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

We have not had the opportunity to do a brake controller installation on a 2023 Nissan Frontier yet. But if the plug is located in the same place as the 2022 model year, then the plug will be tucked behind the kick plate located to the left of the…

view full answer...

Answer 5

From what I could find, it looks like the plug for a trailer brake controller on your 2023 Nissan Frontier is located in the same location as the 2022 model year. That is behind the side panel by the OBD connector and is likely pushed back into the…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

For your 2024 Nissan Frontier I recommend the Redarc Tow-Pro Liberty Brake Controller #RED24FR. I like the Liberty because it is simple, reliable, and looks great in any vehicle. The main unit installs behind the dash, so only the control knob will…

view full answer...

Answer 8

From what I can find on the 2022 Nissan Frontier, the plug for the brake controller that will let you use a harness like the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers #3050-P is located just above the OBD connector, taped tight…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 11

Hey Jeremy, Typically with boat trailers the manufacturer will install hydraulic surge brakes because you don't have to worry about the water damaging wires like you would with electric brakes. That being said, if you use a heat shrink butt…

view full answer...

Answer 12

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…

view full answer...