Sway Bars and Steering Stabilizer For With a 2023 Fleetwood Flair 29M On Ford F53 V8 18,000LB GVWR

Question

Question:

Hello, I have a 2023 Fleetwood Flair 29m F53 18000 GVWR and am looking for: Front and rear sway bars Steering stabilizer Rear trac bar Could you point me in the right direction for compatible parts? Am also looking for an installer in the Sarasota FL area. Many thanks

asked by: Phil

0

Expert Reply:

As your 2023 Fleetwood Flair is on a Ford F53 V8 18,000LB GVWR chassis you have 2 choices for the rear sway bar. The Roadmaster Rear Anti-Sway Bar # RM-1139-149 is 1-5/8" in diameter and mounts in addition to the factory sway bar. They also offer the 1-3/4" Rear Sway Bar # RM25VR. This will also mount in addition to the factory sway bar but is slightly stronger being larger in diameter than the 1-5/8" sway bar. You may need the Extended Square # RM-590050-00 or Round # RM-590050-10 U-Bolts if you do not have 1/2" of threads showing on the end of your current U-Bolts to fit the mounting plates.

As Roadmaster does not offer a front sway bar or rear trac bar the only item left from your list is the Roadmaster Exact Center Steering Stabilizer # RM63RR. This will improve steering from wandering and rut tracking.

Just below our item images on our product page you will find a "Locate installers near me" link. This will allow you to locate and contact installers by your zip code.

expert reply by: Bud M

0

Answer 1

In regards to the Air Lift LoadLifter 5000 Air Helper Springs part #AL57344, you'll still be able to raise the rear of the motorhome for leveling but if you're doing so for service and the rear axle would be suspended, then you would want to…

view full answer...

Answer 2

The correct SumoSprings Maxim Custom Helper Springs for a 2015 Jayco Alante 31L are part #SSR-184-40-1 and the correct Air Lift LoadLifter 5000 Air Helper Springs are part #AL57344. That said, they both mount outside of the frame in the same spot so…

view full answer...

Answer 3

The best improvement you can make to your 2021 Fleetwood Flair 32S built on a Ford F-53 chassis is with a rear sway bar like the Roadmaster part #RM-1139-149, followed by a front bar #RM-1139-148, and then finally with a steering stabilizer #RM63RR.…

view full answer...

Answer 4

Air helper springs have their advantages and disadvantages. You can adjust the pressure in the system according to the load, but the weight of a motorhome won't vary much so you wouldn't really benefit from that adjustability. In my opinion…

view full answer...

Answer 5

When your Lippert Ground Control system is beeping, it means there is some sort of error and it sounds like your screen isn't actually showing what that error might be. The first step you'll need to take is to unplug the 4 pin connection on…

view full answer...

Answer 6

It sounds like you meant that the Fleetwood Bounder is on a 2019 Ford F-53 chassis which is very common. The first step in increasing the stability of the 2020 Fleetwood Bounder on the 2019 Ford F-53 chassis is to replace the factory sway bars. The…

view full answer...

Answer 7

The Roadmaster #RM-1139-149 Rear Anti-Sway Bars that you referenced are the correct sway bars and hardware to replace those on your Ford F53 chassis. The bar is 1-5/8" thick and constructed from 4140 Chromoly steel for outstanding rigidity and…

view full answer...

Answer 8

Unfortunately the dual filament 2057 bulb #30-84-057 does not have an LED replacement. For that light fixture, the incandescent #30-84-057 is your best option. Luma LED Bulb #CM93236 is a replacement for a 1157 bulb which is a completely different…

view full answer...

Answer 9

I did some checking and for a Class A motorhome built on a 2022 Ford F-53 chassis like your 2023 Fleetwood Flair 29M with an 18k GVWR you'd want the part #SSF-170-40-2 for the front and part #SSR-184-40-1 for the rear.

view full answer...

Answer 10

Yes, the Roadmaster Exact Center Steering Stabilizer #RM63RR is going to be superior to both the Bilstein and Safe-T-Plus steering stabilizers for your 2022 Ford F53 V8 18K Chassis under your 2023 Entegra Vision RV Motorhome. The Roadmaster has…

view full answer...

Answer 11

The fitment of Roadmaster's steering stabilizers like the Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes #RM33RR are based on the chassis of the vehicle, along with the GVWR and some other minor details…

view full answer...

Answer 12

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

view full answer...