Bearing Kit For Hubs on 5,200 lb Dexter Axle

Question

Question:

I have a 2015 Heartland P289 Prowler 5th wheel with Dexter 5200lb axles. I need to service the wheel bearings and need new seals, can you advise on the correct seal part number?

asked by: Myles H

0

Expert Reply:

Sure can; I verified directly with Dexter that the correct bearing kit for the hubs on your 5,200 lb Dexter axle is the following:

- Bearing Kit # BK3-300

expert reply by: Kyle S

0

Answer 1

Thank you for the photo and we do indeed have the correct bearing kit for your 2019 Grand Design Reflection with 5,200 lb Dexter axles; the correct kit is the following: - Bearing Kit #BK3-300

view full answer...

Answer 2

Thanks for providing a photograph of your trailer axle sticker. I was able to speak with my contact at Dexter Axle and find out the bearing sizes. You need the etrailer #BK3-300 Bearing Kit. This will get you bearings, seals, and races. At this…

view full answer...

Answer 3

The outer bearing in the TruRyde Bearing Kit, part #BK3-300, is part #LM67048. This outer bearing has an internal diameter of 1.25 inches and uses a bearing race #LM67010 with an outer diameter of 2.328 inches. The bearing kit #BK3-300 is designed…

view full answer...

Answer 4

Your 5,200LB Lippert axle 121067 will use the Bearing Kit #BK3-300. This will give you the bearings, races, grease seal, and cotter pin for one axle hub. The Seal Puller #PTW1219 and Installation Set #PTW83020 will aid you in the removal and…

view full answer...

Answer 5

For a bearing kit for a Dexter 5200 axle we have the kit part #BK3-300 which comes with the correct bearings, races, and seal for your axle.

view full answer...

Answer 6

The Bearing Kit #BK3-300 is the kit you need for your Lippert 5,200lb axle. This kit uses the 2.25 Grease Seal #GS-2250DL. I recommend using the LubriMatic LMX Industrial Strength Grease #L11390 with the new bearings. This grease works well under…

view full answer...

Answer 7

Your 5200-lb Lippert axle 121066 uses inner bearing #25580, outer bearing #LM67048 and grease seal #GS-2250DL. For all of these you can use kit #BK3-300. I also recommend bearing packer tool #ALL647646 for a cleaner method of packing the new bearings…

view full answer...

Answer 8

Thanks for the pictures of the axle information! Based on the information you provided your axle uses the following components: Inner bearing #25580 Inner race #25520 Outer bearing #LM67048 Outer race #LM67010 Grease Seal #GS-2250DL All of these…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 11

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 12

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

view full answer...

Bearing Kit For Hubs on 5,200 lb Dexter Axle

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching