Bearing Kit For Lippert 5,200LB Axle Tag Number 121067

Question

Question:

do u have bearings for 121067 5200lb axle

asked by: Richard R

0

Expert Reply:

Your 5,200LB Lippert axle 121067 will use the Bearing Kit # BK3-300. This will give you the bearings, races, grease seal, and cotter pin for one axle hub.

The Seal Puller # PTW1219 and Installation Set # PTW83020 will aid you in the removal and installation of the parts. I recommend using the LubriMatic LMX Industrial Strength Grease # L11390 with your bearings as it works great in both hot and cold climates.

expert reply by: Bud M

0

Answer 1

There are many things that can affect the voltage on the brake output wire from your brake controller to your trailer brakes such as the power setting on your brake controller, how you are testing the wire and if you are testing it with the brakes or…

view full answer...

Answer 2

Depending on how the trailer was made, there will be a few spots you can check to identify the axle. First, if the trailer was pre-made by a specific company, you may be able to find this information in either the paperwork or on a placard somewhere…

view full answer...

Answer 3

Thank you for the photo and we do indeed have the correct bearing kit for your 2019 Grand Design Reflection with 5,200 lb Dexter axles; the correct kit is the following: - Bearing Kit #BK3-300

view full answer...

Answer 4

For a bearing kit for a Dexter 5200 axle we have the kit part #BK3-300 which comes with the correct bearings, races, and seal for your axle.

view full answer...

Answer 5

Thanks for providing a photograph of your trailer axle sticker. I was able to speak with my contact at Dexter Axle and find out the bearing sizes. You need the etrailer #BK3-300 Bearing Kit. This will get you bearings, seals, and races. At this very…

view full answer...

Answer 6

Sure can; I verified directly with Dexter that the correct bearing kit for the hubs on your 5,200 lb Dexter axle is the following: - Bearing Kit #BK3-300

view full answer...

Answer 7

The Bearing Kit #BK3-300 is the kit you need for your Lippert 5,200lb axle. This kit uses the 2.25 Grease Seal #GS-2250DL. I recommend using the LubriMatic LMX Industrial Strength Grease #L11390 with the new bearings. This grease works well under…

view full answer...

Answer 8

The outer bearing in the TruRyde Bearing Kit, part #BK3-300, is part #LM67048. This outer bearing has an internal diameter of 1.25 inches and uses a bearing race #LM67010 with an outer diameter of 2.328 inches. The bearing kit #BK3-300 is designed…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 12

Hey Jeff, The Pace Edwards JackRabbit Retractable Hard Tonneau Cover w Explorer Rails #311-JED7833 is designed for a 6-1/2' bed while the #311-KRD7936 is designed for an 8' bed. Since you have a 6-1/2' bed the #311-JED7833 would be the…

view full answer...

Bearing Kit For Lippert 5,200LB Axle Tag Number 121067

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching