Class III Trailer Hitch that Fits 2019 Mercedes Benz GLC 43

Question

Question:

I have a 2019 GLC43 and looking for trailer connector and class 3 Trailer Hitch.

asked by: Christine M

1

Helpful Expert Reply:

We have the Curt hitch # C13290 that fits your 2019 Mercedes Benz GLC 43.

expert reply by: Jameson C

1

Answer 1

The Curt #C13290 is confirmed to fit your 2017 GLC 300. I attached a picture that shows what this hitch looks like installed on a similar GLC as yours for you to check out as well.

view full answer...

Answer 2

There is! I did some checking and there is one hitch that is a fit for your 2019 Mercedes-Benz GLC43 AMG SUV. The hitch is from Curt, and I verified with them that the hitch is a fit, with the correct part number being the following: - Curt Trailer…

view full answer...

Answer 3

The Curt trailer hitch, part #C13290 is confirmed to fit. I attached an installation video for this hitch for you. If you'll be using the hitch for towing, you'll also need a trailer wiring harness, part #C59496 and a ball mount/trailer ball…

view full answer...

Answer 4

There is a trailer hitch receiver that I can confirm is a fit for your 2020 Mercedes-Benz AMG GLC 43, which is the following: - Curt Trailer Hitch Receiver #C13290

view full answer...

Answer 5

The Curt #C13290 Class III Trailer Hitches offer a sleek hidden-crosstube design and is going to be recessed behind the bumper. This means the Curt hitch is your best option if you are simply looking for the most hidden unit available on your…

view full answer...

Answer 6

Since you only want to carry your Kuat Transfer like the #KU84FR there is no need to be concerned about wiring. If you did want to install a wiring harness like the #118747, I still wouldn't expect there to be an issue since you aren't…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...