Recommended Trailer Axle for Trailer with 93" Long Hub Face Measurement

Question

Question:

trying to locate trailer axles looking at 93 -80 need help

asked by: Ronald L

1

Helpful Expert Reply:

I do have an option for you but the closest trailer axle we offer for what you're looking for is the Trailer Axle Beam with Easy Grease Spindles part # e93GR which measures 94" at the hub face and 79" at the spring center. If used to replace a trailer axle with a 93" hub face then the wheels/tires will stick out a 1/2" more on each side. The spring seats can then be cut and rewelded. The axle has a 7,000 lb capacity.

I have attached for you below a video I made to help others pick out the correct replacement trailer axle as well as a list of our selection.

expert reply by: Conner L

1

Answer 1

The correct replacement axle for a Quality 3500 Lb 95 HF 80 SC is the Dexter Trailer Axle Beam with E-Z Lube Spindles part #7359765. This option will be a direct replacement with no modifications needed. If you want to replace the brakes and…

view full answer...

Answer 2

The axle you currently have is a Lippert 3,500 lbs axle that has a length of 93" hub face to hub face and spring seat length of 70". Unfortunately we do not have an axle that matches these measurements. The best solution I can provide is…

view full answer...

Answer 3

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 6

From my research on the Harbor Freight 4x8 folding trailer uses 4.80-12 tires on a 12 inch wheel for the 1195 lb capacity trailer and a 5.30-12 for the 1720 lbs capacity trailer. It is a good idea to check your existing tires to see which size they…

view full answer...

Answer 7

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 8

I am sorry I don't have any tires that are going to fit your rim. I do have a couple of comparable size tires that come in a wheel tire combo. I have listed the two below along with their lug patterns. 5 on 4-1/2 Lug Pattern - Kenda 205/65-10…

view full answer...

Answer 9

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

view full answer...

Answer 10

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 11

I went and pulled a Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel #AM32424 from our warehouse to determine the weight capacities and found that on the sidewall it was stamped Load Range D with a 2,150 lb capacity at 65…

view full answer...