Will The Timbren Jounce Springs Fit With SuperSprings Helper Leaf Springs On a 2022 Ford F-350?

Question

Question:

Can I use the Timbren Spacers TFR350SDJ W/ the SuperSprings Custom Suspension Stabilizer and Sway Control Kit - SSA46 Both?

asked by: Eric L

0

Expert Reply:

Yes, the Timbren Suspension Enhancement System # TFR350SDJ can be used with the SuperSprings Custom Suspension Stabilizer and Sway Control Kit # SSA46 on your 2022 Ford F-350. The SuperSprings will mount to your leaf springs while the Timbren replaces the factory jounce spring. They will not interfere with each other.

expert reply by: Bud M

0

Answer 1

That's a good question, and you will keep the factory overload spring on your 2020 Ford F-350 Super Duty, as they are designed to fit directly over that spring. The correct SuperSprings kit for your '20 F-350, which will also work with your…

view full answer...

Answer 2

There are two levels of adjustment on the SuperSprings Custom Suspension Stabilizer and Sway Control Kit part #SSA46 for your 2017 Ford F-350. The adjustment is located on the shackle that attaches the roller to the bottom of your leaf spring. There…

view full answer...

Answer 3

The unloaded picture of your Timbren setup installed on your truck is concerning. Does the truck seem to sit level from left to right? Was it ever in an accident by chance? Are any of the suspension components worn out? You really shouldn't see…

view full answer...

Answer 4

The SumoSprings kit part #SSA46 does fit your 2019 Ford F-350 that has the overload spring you mentioned. This has the 3,500 lb weight capacity you are looking for as well.

view full answer...

Answer 5

It does indeed; I am happy to verify for you the dual rear wheel 2023 Ford F-350 Super Duty is 100 percent compatible with the SuperSprings kit you asked about, which is the following part number: - SuperSprings Custom Suspension Stabilizer and Sway…

view full answer...

Answer 6

If you plan to have the truck bed camper removed more often than not, then I would instead go with the standard Timbren Suspension Enhancement System - Rear Axle #TFR350SDJ. This would not cause a harsh ride when the truck is unloaded, but it would…

view full answer...

Answer 7

The only difference between the Timbren Suspension Enhancement System part #TFR250SDJ which is for a Ford F-250 and the Timbren Suspension Enhancement System part #TFR350SDJ which is for a Ford F-350 is that the latter comes with a 1/2" spacer,…

view full answer...

Answer 8

Yes, the Timbren Suspension Enhancement System #TFRTT350J will fit your 2023 Ford F-350 Dually Supercab 4x4. This is their severe service kit which is only recommended to be used on vehicles which will always have a lot of additional weight being…

view full answer...

Answer 9

There is not any drop required, nor will there be any interference with the helpers on your 2020 Ford F-350's overload springs to install the Roadmaster Rear Anti-Sway Bar #RM93VR.

view full answer...

Answer 10

Good question, and while we do have a rear anti-sway bar for your 2019 Ford F-350 Super Duty, the #RM-1139-173 is only for trucks that already have one, and there isn't a hardware kit that will allow installation of this anti-sway bar on a truck…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...