Will the Electric Trailer Brake Kit - 10" - 3,500 lbs Work with Hadco 440 Hubs
Question:
Good morning-I am upgrading the brakes on a 1970 Lo-liner and need to know if the AKEBRK-35-SA brakes will work with the existing Hadco 440 hubs. They are the old style with the donut inside. Thanks,
asked by: Michael L
Expert Reply:
I don't have a way to look up Hadco parts unfortunately but I can tell you how to confirm fit of the Electric Trailer Brake Kit part # AKEBRK-35-SA. The first thing you'll want to do is make sure it fits the axle, if the axle has a four bolt (square center to center) flange then these brakes will fit the axle. In order to confirm it fits the hubs you'll need to measure the inside of the drum surface on the hub, these brakes are designed for a 10" diameter x 2-1/4" wide surface. I have attached some photos below to assist.
If these don't match your hubs then we can offer new ones if you can provide the bearing details which I have attached an article on below.
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: hadco
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement for Hadco 10" x 2" Electric Brakes
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Q&A: Can Hub and Brake Drum Be Replaced with Idler Hub on Tandem Axle Trailer
- Q&A: Replacements For Hadco Trailer Axle With Hadco 3109 Hubs
- Shop: Trailer Axle with Idler Hubs - 4" Drop - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Q&A: What is the Proper Torque Range for Trailer Wheels
- Video: Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 84546UC3 Review
- Video: Review of TruRyde Trailer Spindles - EZ Lube Spindle - TRU87FR
- Search Results: axletek 10" x 2 14" electric brake assembly
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Shop: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 2.125" / O.D. 3.376" - 440972
- Q&A: Replacement Brakes and Hub/Drums For a 2007 Airstream Safari Trailer With 5,000LB Dexter Axles
- Q&A: Recommendation To Replace Drum Hubs With Idler Hubs
- Video: Trailer Hub and Drum Inspection FAQ
- Video: etrailer Hub And Drum Assembly Installation
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-G-EZ-K Review
- Video: etrailer Trailer Idler Hub Assembly Installation
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-EZ-K Review
- Article: How to Measure a Trailer Axle
- Q&A: How Much Clearance Between the Frame Is Needed for a Trailer Tire
- Article: Most Popular Wheel Bearings
- Shop: Trailer Hitch
- Search Results: 25580
- Search Results: l44649
on Trailer Brakes
