Replacements For Hadco Trailer Axle With Hadco 3109 Hubs
Question:
Need to replace a hub. Hub casting HADCO ENG LA 3109. I was able to clean up bearings and seal to get the following part numbers. Bearings: LM67048 [outer] and LM501349 [inner]. Oil seal is 5M HADCO 3109 5M. I was looking for a greased hub kit. No luck. I have also had no luck finding a hub [maybe obsolete?]. Could you recommend a replacement hub? Please see photos below. Thank you.
asked by: Ramon J
Expert Reply:
Though we do have the replacement bearings, races, and seals available for your Hadco 3109 hub (which I have listed below), the combination used will not have an equivalent replacement hub available, unfortunately.
Replacement Trailer Hub Bearing # 501349
Replacement Race for 501349 Bearing # 501310
Replacement Trailer Hub Bearing # LM67048
Replacement Race for LM67048 Bearing # LM67010
Grease Seal # 1105-100-035
If you are wanting to replace the whole hub though, your best bet will be to replace the whole axle with something that uses a more common bearing combination. This will require a few things though. I couldn't find the capacity of this set up, so this will need to be confirmed as it will determine which bearing combo is best. I included a link to all the axles we currently have on the site for you to check out.
Next is the axle measurements, mainly hub face to hub face and center of spring seat to center of spring seat. I included a quick picture of what I mean by that as well. This can cause issues as the axles we carry may not match what you have, especially with it being an older axle. If this is the case, you will need to contact a local Dexter dealer to have an axle built to your specifications.
Last will be the bolt pattern of your hubs and wheels. I included an article we have specifically on this subject as it comes up quite often
(click to enlarge)
(click to enlarge)
(click to enlarge)
(click to enlarge)
(click to enlarge)
(click to enlarge)
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 2.000 Inch I.D.
- 2.875 Inch O.D.
- Redline
more information >
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 2.891 Inch O.D.
- Bearing 501349
- Race 501310
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - Inner Diameter 1.625" - Outer Diameter 2.891" - Qty 1
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.625 Inch I.D.
- Bearing 501349
- Race 501310
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Replacement Race for LM67048 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 2.328 Inch O.D.
- Bearing LM67048
- Race LM67010
- 5200 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Grease Seal
- Search Results: hadco
- Shop: Demco Hydraulic Brake Kit - Free Backing - Galvanized - 12" - Left/Right Hand Assemblies - 7K
- Shop: CE Smith Spool Roller Assembly for Boat Trailers - Galvanized Steel and Black Rubber - 4"
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Search Results: bulldog
- Search Results: fire extinguisher mount
- Search Results: m170a
- Search Results: pin
- Q&A: Locating Replacement Hubs for Hadco 394 Assemblies on 2000 Utility Trailer
- Q&A: Axle Replacement Recommendation for a Trailer with Unique Spindle Dimensions
- Shop: Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 6,000-lb E-Z Lube Axles - 6 on 5-1/2 - Galvanized
- Video: Redline Trailer Bearings Races Seals Caps - Seals - 1105-100-035 Review
- Shop: Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility
- Search Results: boat trailer brakes
- Search Results: brake lines
- Video: Review of Demco Trailer Brakes - Hydraulic Drum Brakes - 42029-28
- Q&A: Torque Settings For Wheel Lug Nuts For Boat Trailer And utility Trailer
- Video: This Old Trailer: Electric Trailer Brake Installation Part 1
- Q&A: Replacement Trailer Grease Seal Recommendation for 2 inch Inner Diameter and 2.9 Outer Diameter
- Q&A: Do Trailer Drums have to be Turned when Replacing Electric Trailer Brake Assemblies
- Q&A: Recommended Wheel Cover for Hadco 322
- Q&A: What Does a Trailer Tire Load Range Mean
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Video: Bearing Repacking and Grease Seals Installation
- Video: etrailer Electric Trailer Brake Kit Installation
- Article: How to Measure a Trailer Axle
- Shop: RV Interior Lighting
- Shop: RV Jack Pads
on Trailer Hubs and Drums
