Replacement Tarp for Extang Revolution Tonneau Cover on a 2008 Chevy Silverado 1500 Short Bed

Question

Question:

Im looking for a replacement cover for my extant revolution cover that is on my 2008 Chevrolet Silverado 1500 LTZ crew cab short bed. Could you please let me know which one is the proper replacement.

asked by: Brian K

0

Expert Reply:

Yes, the correct replacement tarp for the Extang Revolution Soft Tonneau Cover on a 2008 Chevrolet Silverado 1500 is the Replacement Tarp for Extang Revolution Soft Tonneau Cover part # EX53645 for 5-1/2' beds or part # EX53650 for 6-1/2' beds.

expert reply by: Conner L

0

Answer 1

I can; you are 100 percent correct that the replacement tarp for the Extang Revolution 54425 tonneau cover is the following part number: - Replacement Tarp for Extang Revolution Soft Tonneau Cover #EX53425

view full answer...

Answer 2

I spoke with my contact at Extang and described to him the part needed. It is the slide block #EX1077.

view full answer...

Answer 3

You will need the Replacement Tarp #EX53445 to replace the tarp on the Extang Revolution soft tonneau cover (EX54445). This is the Revolution tonneau cover which fit the 5-1/2' bed on a your 2015 Chevrolet Silverado crew cab. The Tarp #EX54PR is…

view full answer...

Answer 4

This #EX53780 tarp is a replacement for the EX54780 Extang Revolution tonneau cover that fits a 2004-2014 Ford F150 with the 5-1/2 foot bed.

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 10

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 11

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 12

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...