Hollywood Racks Sport Rider SE2 Compatibility With Fat Tire Electric Bikes

Question

Question:

Is the Hollywood Racks Sport Rider SE2 compatible with a travel trailer?

asked by: Michael K

0

Expert Reply:

The Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes - 2" Hitches, part # HLY84FR, will be able to transport these two bikes. The rack can support up to 80lbs per bike. The rack is also fat tire compatible. The rack can tilt while loaded with bikes, giving you access to the rear of the vehicle. It has anti-rattle hitch receiver lock which helps do away with extra movement in your rack while locking the rack to your vehicle. The arms that secure the bike lock as well.

Since the bikes are step thru you will need an adapter to create a top bar this rack will be able to clamp to. The Hollywood Racks Bike Frame Adapter Bar for Women's and Alternative Frame Bikes, part # HRBA-PRO, attaches to the seat post and the handlebar stem of each bike. The arms of the bike rack will clamp this bar.

You will need to make sure you do not exceed the maximum tongue weight of your hitch receiver. The weight of the bikes you are carrying and the weight of the bike rack cannot exceed that value. You should be able to get that information from the manufacturer of the hitch receiver.

expert reply by: Mark Smith

0

Michael K.

5/19/2021

Is the Hollywood Racks Sport Rider SE2 compatible with a travel trailer?

Reply

Mark S.

5/19/2021

The Hollywood Racks Sport Rider SE2, part # HLY84FR, is not compatible with travel trailers. However, the Swagman E-Spec Bike Rack for 2 Electric Bikes - 2" Hitches, part # S94FR, is compatible with travel trailers. This rack weighs 60lbs and it is rated to carry bikes up to 70lbs each. You will still need an adapter bar so this rack will having something to clamp to transport your bikes. The Swagman Bike Frame Adapter Bar for Electric, Step Through, and Cruiser Bikes, part # S57FR. This bar will connect the seat post of your bike to your handlebar stem creating a faux top tube. The racks ratchetting arms will clamp to each of the frame adapters. The rack itself has a tilt down mast which allows you access to the rear of the vehicle when not transporting bikes. It also comes with locks that lock the rack to the vehicle and also lock your bikes to the rack. I have included product links and video links below.

Reply

Answer 1

I can; you are 100 percent correct that the replacement tarp for the Extang Revolution 54425 tonneau cover is the following part number: - Replacement Tarp for Extang Revolution Soft Tonneau Cover #EX53425

view full answer...

Answer 2

The EcoHitch #EH97FR that you'd looked at is a Class III with a 2 inch receiver opening. This hitch is pretty expensive because it's constructed of an alloy that combines steel, aluminum and stainless steel, much of which has been…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 8

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 9

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

view full answer...

Answer 10

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 11

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 12

I can definitely help and point you in the right direction. Both brands make a great quality air bag kit. Personally I prefer the Firestone Ride-Rite #F2709. The air bags themselves are known to be more durable than others. They can hold more PSI…

view full answer...

Hollywood Racks Sport Rider SE2 Compatibility With Fat Tire Electric Bikes

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching