Length of Westin E-Series Round Nerf Bars 23-2310 for Dodge Ram

Question

Question:

What is the overall length of the Westin Nerf Bar 23-2310?

asked by: Richard

1

Helpful Expert Reply:

I spoke to Westin about the Westin E-Series Round Nerf Bars part # 23-2310 and they said the nerf bars are around 81" long.

expert reply by: Conner L

1

Length of Westin E-Series Round Nerf Bars 23-2310 for Dodge Ram
(click to enlarge)

Answer 1

Hello Cory. I can definitely point you in the right direction, but there is not a B&W Companion option that will fit into a round gooseneck ball hole. As you said, the B&W Companion hitch is only compatible with the B&W Turnoverball…

view full answer...

Answer 2

Yes, the Replacement PlusNut Hardware Kit #Y8880039 that you referenced is an optional hardware kit for your Yakima 60" Tracks for Roof Racks #Y01135. This hardware kit is designed for use with sheet metal roof applications.

view full answer...

Answer 3

Thank you for the photos! It looks like you have an older Yakima system but we do have the Replacement Yakima Control Tower for Factory-installed Tracks #Y8890027 that will fit. This is sold in a quantity of 1 so be sure to change that to what…

view full answer...

Answer 4

Yes, the Replacement Yakima Control Tower for Factory-installed Tracks #Y8890027 will fit the now-discontinued Landing Pad 12.

view full answer...

Answer 5

The option that will work for your 2017 Cherokee 29TE depends on your axle diameter. For 2-3/8 inch axles, you will want the Dexter Trailer Springs Over-Under Conversion Kit, #K71-384-00. If you have a 3-inch diameter axle, you will want the kit,…

view full answer...

Answer 6

You do not need to remove the bed of your truck to install the HappiJac part #LC182906-182971 that you referenced. I found a copy of the install instructions for this part number (see attached pictures) and there's no mention of the bed needing…

view full answer...

Answer 7

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 8

To determine if the Replacement Shock for Titan Model 6 and 10 Brake Actuators, part #T1242600 will work to replace your Gabriel number 610712 (T2032) shock, you will need to verify a few quick measurements. Part #T1242600 will work as a replacement…

view full answer...

Answer 9

The mounting holes on the Curt 5-Position Adjustable Channel Bracket #C48650 measure 10" center of hole to center of hole.

view full answer...

Length of Westin E-Series Round Nerf Bars 23-2310 for Dodge Ram

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching