Reason for Metal Ring Inside the Stainless Steel Seal Ring on Spindle Grease Seal Set
Question:
In the photos of this product it shows a snap ring or circlip that resides in the sleeve. Ive yet to find a clarification on the snap ring / circlips purpose. The instructions are very vague. I found a set of instructions that states to torque the spindle nut to 20 foot pounds then back it off. Im assuming the torqueing compresses the seal ring on to create a tight fit. Does this sound correct? However I fear torqueing to 20 foot pounds will put stress on the tapered roller bearings. Please advise if you can.
asked by: RICHARD P
Expert Reply:
According to Bearing Buddy, the purpose of the metal ring inside the stainless steel seal ring on the # BB60005 is to add additional support. Because the seal ring is so thin in this kit, they added a support ring that goes in the back side of the seal ring so it doesn’t collapse. The support ring is required. Regarding the instructions for the Spindle Grease Seal Set, it calls for 20 inch pounds of torque, not foot pounds.
Product Page this Question was Asked From
Spindle Grease Seal Set for L44649 Inner Bearing and 1.980 Bearing Buddy
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.375 Inch I.D.
- 1.98 Inch O.D.
- Bearing Buddy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Spindle Grease Seal Set for L44649 Inner Bearing and 1.980 Bearing Buddy
- Q&A: 1 3/8 Inch Trailer Seals for Custom Axles
- Shop: Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Shop: Grease Seal
- Q&A: Installing Bearing Buddy Grease Seal Set # BB60005
- Q&A: How Tight Is Seal Ring Supposed To Fit On Trailer Spindle
- Search Results: spindle wear sleeves
- Q&A: Which Hubs Can Be Used to Replace the Hubs on a UFP H-1062-3
- Search Results: bearing sleeve
- Q&A: Bearing Kit for a 2016 Shorelandr Boat Trailer
- Q&A: Inner Diameter of Steel Ring in Bearing Buddy Spindle Grease Seal Set # BB60005
- Q&A: Should Grease Seal Fit Loosely on Spindle or Hub Bore
- Search Results: bb60005
- Search Results: bk1~150
- Shop: Timken Replacement Bearing and Race Set - L44649 and L44610
- Shop: Replacement Trailer Hub Bearing - L44649
- Shop: Grease Seals 10-36 (pair)
- Shop: Grease Seal
- Video: TruRyde Trailer Bearings Races Seals Caps - Bearings - BK1-150 Review
- Search Results: reliable axle
- Shop: Trailer Hitch
- Search Results: bearing buddy
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Search Results: l44649
- Article: Trailer Tire Sizing
- Shop: Brake Controller
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Suspension Enhancement
on Trailer Bearings Races Seals Caps
