Replacement Options for Sport Masters Tonneau Cover on 2001 Chevrolet Silverado

Question

Question:

I am looking for a soft cover replacement to fit an existing Sport Master tonneau cover that is 20 years old. It is on a 2001 Silverado 6 bed. Please let me know if you have one that is compatible as I cant find any info on the Sport Master company. Thank you in advance

asked by: Mark R

0

Expert Reply:

Since Sport Masters has gone out of business, there are no longer replacement parts available. Unfortunately, this means the only option is to replace the entire cover. For a soft cover replacement I recommend the following:

-Access TonnoSport Soft, Roll-Up Tonneau Cover # A22020199 (1500 and 2500 6-1/2' bed)

-Access TonnoSport Soft, Roll-Up Tonneau Cover # A22020209 (1500 Stepside 6-1/2' bed)

You will have to choose the correct cover depending on your Silverado model. These covers feature a clamp-on installation, 2-year limited warranty, and are made in the USA.

expert reply by: Robin H

0

Answer 1

I took a look at our selection of soft tonneau covers that fit your short bed 2001 Dodge Dakota but unfortunately it doesn't look like any of them are designed to fit with the snaps - they all use a Velcro-type connection to the rails called hook…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

The Air Lift LoadLifter 7500 XL Air Helper Springs - Rear Axle #AL57595 you were looking at is confirmed to fit your 2018 Ram 3500 but does not include an on-board compressor. For a compatible compressor I recommend the Air Lift QuickShot Compressor…

view full answer...

Answer 10

Yes, the Air Lift LoadLifter 5000 Ultimate Air Helper Springs part #AL88399 will fit your 2018 Ford F-350 with most above bed base rails. The reason for this is because the air springs install underneath the frame rails whereas the brackets for most…

view full answer...