Recommended Rhino-Rack Pioneer Platform and Capacity for a 2022 Hyundai Palisade

Question

Question:

Rhino-Rack Pioneer Platform Rack - Flush Side Rails - 60 Long x 54 Wide for Hyundai Palisade 2022 with flushed rails- the weight of the rack is already 62lbs...how much max weight of the roof top tent could I put on there?

asked by: Carlo

0

Expert Reply:

I did some research it looks like the roof of 2022 Hyundai Palisade has a 220 lbs capacity. You are correct the Rhino-Rack Pioneer Platform Rack item # RR87QX weighs 62 lbs and it has a 176 lbs capacity but both of those together exceed your Palisades capabilities. You will have a 158 lbs of capacity remaining after the weight of the Pioneer Platform is accounted for.

To mount a roof top tent to the Rhino Rack Pioneer Platform item # RR87QX you will need the Rooftop Tent Mounting Brackets item # RR57RH.

If you would like to email me back with the specific tent you are looking at I would be happy to confirm it will work with your set up.

expert reply by: Jerred H

0

Answer 1

Yes the Yakima FrontLoader bike rack part #Y02103 that you referenced will fit on the Rhino Rack crossbar setup for Retrax XR Tonneau Covers #RRVA165B-RRRLT600 that you referenced.

view full answer...

Answer 2

It depends on what kind of roof you have on your 2021 Hyundai Palisade. If you have the the raised side rails you can use this kit that uses the Yakima Jetstream Crossbars #Y00425 The Ridgeline Towers #Y00145 and the ridgeclip #Y89FR. This leaves…

view full answer...

Answer 3

You are correct there is a weight advantage for aluminum, item #C18100, over steel, item #CC-100, but the biggest reason aluminum is considered over steel, for most of our customers, is corrosion resistance and appearance. You do not need to upkeep…

view full answer...

Answer 4

Installation of a wiring harness like the Curt T-Connector Vehicle Wiring Harness #CU94FR is not a requirement to get the etrailer Trailer Hitch Receiver #e95ZR installed on your 2022 Hyundai Palisade. The wiring harness is installed to provide power…

view full answer...

Answer 5

As long as the crossbars you use aren't wider than the widest part of the vehicle (usually the mirrors), which could be a safety problem or even illegal in some areas, you could certainly use longer crossbars than the 58 inch crossbars. Since…

view full answer...

Answer 6

In order to mount the Rhino-Rack Pioneer Platform Roof Tray part #RR35TB to Rhino-Rack Heavy-Duty Roof Rack Crossbars you need the Pioneer Platform Mounting Kit for Rhino-Rack Heavy-Duty Crossbars part #RR43105. This adapter attaches to the channels…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

I've used the etrailer cargo basket #e99054 on my Tahoe and I liked it a lot. It adds a good look all the while giving options to how long you want it to be. I would recommend getting the XL basket #e99054 as it fills up the roof which looks good…

view full answer...

Answer 9

Yes, the Leg Spacers #RRPLHS4 will fit on your RCL Legs #RRRCL6. This will add 3/8" thickness to your legs and allow for the platform to sit flat on your legs.

view full answer...

Answer 10

The Curt #C89CR trailer wiring harness you'd looked at isn't a fit for a 2023 Hyundai Palisade, but fortunately we DO have an option for you that is mostly plug and play. You'll want to use the Curt #C43FV. The harness plugs inline…

view full answer...

Recommended Rhino-Rack Pioneer Platform and Capacity for a 2022 Hyundai Palisade

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching